Re: Pics of of old Japan woodworker chisels...
david weaver
Japanese chisels are a bit difficult to sell used compared to what their price would be new. Iyoroi still makes some (and I use this term, I know it will rub some people the wrong way because of the maker's reputation as supplying commodity chisels through harima in the US) higher end chisels. Figure those chisels from japan (not from a US seller) would probably be about $60-70 each, but I don't see a similar current offering. I'm basing that on a white steel mokume iyoroi only being about $70 or a little less on average now, and while Iyoroi's mokume isn't highly regarded visually, it is super dreamy on a sharpening stone, and a little more desriable even from a practical perspective than the plain iron backing. I'd call it a draw, trading the cost of the kamaji for the ebony handles.
Just giving you my opinion having bought three sets of four used (two were new old stock) chisels now, from iyoroi, an unknown maker from the 1980s that were labeled "Crysanthemum 3000 (I think they were probably iyoroi), ouchi and miyanaga, I'd guess half of new or just a little more would be a realistic value. So $400 or so.
My advice is to keep them, and I don't know if those are blue or white. My ouchi and iyoroi are white steel, and iyoroi even on their higher end chisels are kind of soft compared to makers like ouchi, but not in a way that affects work. If I were given the two and not aware that ouchi's reputation is better than iyorois, I'd probably prefer the iyoroi because they still hold an edge better than any of my western chisels and they are twice as easy to sharpen as the ouchis.
Maybe someone here can confirm, but I think in the 1980s, rosewood and dressiness was all the rage here, but in japan the flashiness is not as highly regarded. Someone who lives in japan told me that the guy who runs JWW, or who used to, was joked about by dealers in japan because he came looking for flashy chisels and they thought he was foolish.
That's a long way around, I guess, of saying that it's not as easy to unload japanese chisels for a high percentage of the US retailers costs as it would be to do with something like a LN or LV tool, and JWW may stock something like that now, but their prices are far out of line (the last I looked, stu tierney who is based out of japan charges about half as much for tsunesaburo planes, and I know fujibato charges much much less for chisels. Maybe just over half of what JWW asks). So, I'd base value on a percentage of the japanese cost (figure 114 yen per dollar right now) and not what some of the US retailers ask.
One other side comment, it's easier to compare prices when the exchange rate is bad, and right now it's very much in our favor, which makes it easier to track down low prices from people like fujibato, takeshi kuroda (metalmaster) and stu tierney who sell out of japan in yen, but ship to the US. The level of service isn't the same as having a specialist in the US (is there really anyone filling that role any longer?) but the price disparity is so large right now between dollar based retailers and yen retailers that it makes it hard to justify.