New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

***SURVEY: THE IDES OF JANUARY***

Posts

***SURVEY: THE IDES OF JANUARY***

#1

Ellis Walentine

***SURVEY: THE IDES OF JANUARY***

Ellis Walentine

Yes, folks, it's that time again -- time to toss out another contentious question for your thoughts and opinions. As usual we'll be distilling replies to their essence and sending them off to Woodworker West magazine, where our bi-monthly column "News & Views" has appeared for the past 15 years.

This time around, I would like to hear your musings on "making do," or getting by with less. Not everyone can afford every conceivable tool and machine, nor do many of us have the luxury of a large shop. So how do we manage to get things done. I'll be interested to hear some of your coping strategies. How have you arrived at the right mix of resources to accomplish what you want to accomplish? (Hint: It might involve outsourcing some things you can't do alone.) Has your formula changed over time? Do you adjust your ambitions to the tools at hand, or do you tool up to meet your ambitions?

We all get by with what we have. Let's hear your stories of how you do it.

Ellis Walentine, Host

WoodCentral.com

Re: ***SURVEY: THE IDES OF JANUARY***

#2

Jack Guzman from Maine

Dovetails as a doorway

Jack Guzman from Maine

I have learned very many new skills by adapting to the lack of an expensive tool. The most important one to me is dovetailing. I was a disciple of Norm(Abrams) and was equipping my shop with the tools needed to do the things he taught on his show. I started to look into dovetailing jigs and accessories.I desired the Leigh jig but it was out of my reach financially. I looked at the cheaper jigs and found them to be inadequate and pretty flimsy in construction. So I concluded that I needed to learn to cut them by hand. Using a booklet by Ian Kirby I worked at it until I could make a functional dovetail. The process amazed me in that it was so easy to do. From there I started exploring hand tool alternatives to other operations. I never looked back.A whole new world of woodworking opened up for me and since I have learned many new skills.

I still use power tools but I still get my greatest satisfaction from the things I build by hand.---Jack

Re: ***SURVEY: THE IDES OF JANUARY***

#3

Re: when it becomes doing less with more..

david weaver

....then I've got plenty of contributions to that!!

I don't have any power tool jigs, except for a small coping sled. That's about as much as I can say in terms of doing with less. I've got way more than enough hand tools to make up for it, though.

Re: ***SURVEY: THE IDES OF JANUARY***

#4

Re: ***SURVEY: THE IDES OF JANUARY***

Curt Putnam

"Tooling up to meet ambitions" Wonderful phrase - had not heard that before. Totally guilty. Once I've decided to do something, I generally tool up to accomplish that objective. It is easier to learn new techniques and skills with the proper, good, tools. Sub par or junk tools are a bad idea. For me, there is an array of new tools that I want, but none will further any of the projects currently in the to-do stack. I've got a mixture of new and vintage and am now at the point more thinking about projects and what I've got to do than I am about the tools needed for their accomplishment.

There was a time when the badly rotted stairs from the exterior doors to the basement did not get replaced because I could not afford the nails needed nor the gas to go get them. Fortunately, That level of impoverishment no longer exists. When I was young and strong, the wallet failed. Now that the wallet is stronger, the body is failing. (Darn Murphy is always right.)

Re: ***SURVEY: THE IDES OF JANUARY***

#5

Re: ***SURVEY: THE IDES OF JANUARY***

TomD

I have said it many times here before, it comes down to production vs process. My friend just finished his 46 foot catamaran. That is a large project in anyone's book, it actually doesn't require that many tools, but if you want to get through it fast, you need to scale up for it. One of my contributions was to convince him to let me build a staircase to the second floor, so he wouldn't tire himself out climbing ladders, maybe even suffer a fall. When you are producing, you need to have the gear that will be most productive. But for a hobby, for and interesting project, or for learning skills, you don't need a lot of tools, you can practice minimalism or anything else you want. You can also focus on one aspect of woodworking, like cabinets, but to produce a house full of stuff in a variety of style you may need a lot of tools.

Another thing that happens, is getting caught up in the desire to do stuff the way we see it on a video, I see that in a lot of hobbies I am connected with. Some hobbies make almost all the stuff themselves, knifemaking being an example of that for some, others are very tied to convention, and a less self sufficient attitude. Bicycle frame building would be one of those. This has morphed to an odd situation where people see the craft as the tests, reviews, or teaching that goes on in the major magazines or video, and not the actual making. That's OK, but it may turn some people off who get scared away at the idea one needs a ton of stuff to actually do the projects.

I do not send anything out. I do everything I can, tree to finish, in house, usually including design. I have a ton of gear, but I have been at this almost 50 years, and have been spending a large par of my discrettionary income on tools for probably 35 years. But I started out with very little, and am pretty sure it was more fun at the time, than having all the tools one could want, but less space, and more maintenance costs and time to maintain.