We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
If anyone happens to be in the neighborhood of E. TN today, Curtis will be demonstrating making a Windsor chair bottom tonight in Kingsport.
I don't know how Curtis goes about it but some years ago I watched someone. They stood on a piece of white pine and with some sort of two handed adze affair they made the chips fly. I thought to myself that if ever there was a case for steel toed shoes this was it.
My regret is that I did not learn of Curtis until I was too old to withstand the rigor of his classes. He is an American Icon and his chairs have no equal, in my opinion. P.
.......He sets the bar for all around nice person. He is so utterly unselfish in sharing his knowledge with interested people whether you are asking an elementary question or one of great depth.
Tonight I will be taking a family heirloom chair and will ask him about repainting it. His paint jobs are beautiful. Well, heck, the whole of his chairs are beautiful. The crispness of his turnings are without equal.
Rob Cosman used the safety device pictured below during a course he taught...we used an adze to hollow out the sides of a round box.
The device is simply two L-shaped plywood pieces with a cleat on the inside that is placed so that the person can stand on the L-shaped pieces while the cleat holds the work in place. Any accidental deflections of the adze will hit the plywood, saving your ankles from becoming a bloody mess.
The Japanese do it with bare feet and a much sharper adze. It is all in the set-up, you can't swing high, and the thing stubs out under your foot. If you play golf you probably have the idea. Or croquet...
https://www.youtube.com/watch?v=TdRMdjA8kHg
Just picked that video out randomly. Reminds me of when I used to work wood Japanese style in Birkenstocks and dropped my plane blade. Actually... this fits in with the post above. I didn't want to have to regrind the thing by hand, so I shot my foot out, and caught the blade with my toes. No biggie, didn't hurt that much, a little later there was a slushing sound in my footbed...
Unless he changed his methods since he made his videos on chairmaking he uses a different method. He shows using a small hand held adze working off a bench.I have a gutter adze and have used the foot method.I don't recommend it for beginners but it's not difficult to do safely once you master the tool.You don't swing the tool randomly,you make specific cuts.Michael Dunbar discusses the method in his book.
I would love to be there. Curtis is amazing.---Jack
Not exactly the first time I wished I was in TN, this would be fantastic to be able to go see. Oregon is a bit far however
If you haven't seen them Curtis has a rather fantastic set of videos on youtube where he walks through making a chair from the log all the way to the finish. Very interesting and useful to watch even if you never actually make a chair.
In the shipyards they used to knock the bottoms out of the smaller nail kegs and let the apprentices wear them as shin guards until they became proficient with an adze.
I was watching Hell on Wheels today, and they were all putting their backs into laying track. They brought the hammers in unison up to their chests, or shoulders, and with hands wide spread, returned the head to the target. I have never laid track, but I would guess that if they truly set those spikes in 3 hits, those hammers were going way above their heads, their hands where tight to each other, but then they might have lost a few actors.
In the case of saddling, I never felt the least bit of risk a bout cutting my feet. If you keep the hands leading, and the elbows braced, it basically can't come back that far. The first time I ever did it i got a good seat, and kept my toes. But... It would be a while before I got super close to my objective. I had some extra stock to plane off. But now, if the idea was to lead the tool in from over my head. I would want something a little more reassuring on my feet than sandals. But Hell on Wheelsing it, no problem.
He allowed it took 5 minutes in his shop but then he has sold over 2000 chairs. He said that early on when he had little money and few tools he carved out the seat with that curved draw knife affair (don't recall its name). Now he begins with the tool you described but only used it for a minute or two before he proceeded to the curved draw knife for the bulk of the hollow excavation. His performance with the draw knife was most entertaining- huge shavings, medium shavings, finest refining shavings and nice swishing sounds of sharp tool slicing through wood to accompany it all. It was the woodworking equivalent of the YoYo Ma concert I went to.
Re: curved draw knife affair == travisher I believ
William Duffield
Inshave (sometimes called a two handled scorp)
Scorp
The above two images are Pfeil (Swissmade) products sold by Woodcraft. They are basically bent drawknives.
Travisher
These are basically bent spokeshaves. This travisher is made by Claire Minihan, an associate of Peter Galbert, another teacher of Windsor Chairmaking. There are lots of words and pictures on their websites on how these travishers are built:
I took a winter vacation in Tennesse once, lot of interesting people. At the time was doing a spot of work with TEAM aircraft. Then we dropped into Alabama for a while.
Clever device in that he uses it to hold the piece at the same time. But if you look at those angles, you can see how impossible it would be to hit your body with that thing.
However, seminars are a potential blood bath. I remember seeing people nearly rappel off the dynamic end of a line once. Straight drop, any luck they would have killed a few of the people offering advice from the ground up. I was one of the safety officers, and caught it just in time, though it wasn't my gig, I was just walking past. Most dangerous part of an outing is when everyone gets comfortable with the new skills they have just learned and starts giving advice.
A good friend of mine makes chairs among other things. He came up with this travisher design that more closely resembles a pull-scraper. The idea is that the "wings" on a standard travisher can sometimes get in the way, so this design allows you to get into tighter spots. The unit is made of ebony and brass. Sorry about the picture size; I have the original somewhere, just not at my fingertips.
....that served this tool's function. He said it was for shaping the heels of shoes. He had cut the handles off it. It fit in the tighter places and saved card scraper work. It had a name but I don't remember the name.
- One size does not fit all. Never did; never will!
- If you want to buy a tool, there's probably no size out there that perfectly fits you, your shop, and your applications.
- All tools are kits.
I enjoy investigating different tools that might perform the same function. I am definitely not of the "minimalist" persuasion, selecting a bare bones toolset and selling everything else, nor do I review or approach tools with the intent to select the one best tool (or bench, or tool box). When I comment on a tool's features, it is usually intended to help people think about the alternatives, and how they might want to build one or modify the one we are examining, but not necessarily to condemn the tool. Ebony makes a stunning looking tool, but IMHO it is unnecessarily expensive and difficult to find and unnecessarily difficult to work. If this on cuts like Galbert's tools, with a blade and a metal mouth on the bottom, the ebony will not get substantial wear, so you wouldn't even need a long wearing wood like ebony or lignum vitae for the base. For the handle, saw and planes have shown us that beech, apple, cherry, maple, etc., should suffice.
I don't mean to hijack Bill's thread here. In particular, my intent is not to pit Curtis Buchanan's skills and advise against Peter Galbert's. You can learn important lessons from both of them.
The link is to a video in which Peter shows how he uses his travisher. You might figure out from it why it has the high horns, and also why the one Ellis shows has no horns. If your bench has a tail vise and a row of dog holes, you might be able to use a curved bottom spoke shave instead. If you are using hand screws instead of the quick grips to hold the seat to your bench you might need the extra clearance of Ellis's. You might also find that the way you need to twist your wrists or lift the handles is at first counterintuitive.
I haven't tried either one of these travishers, so I can't even say whether I think their shapes would be comfortable for me to use. Maybe I'll get an opportunity at Handworks in May in Amana, IA, or in at WIA in September in KC.