New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Built another backsaw *PICS*

Posts

Built another backsaw *PICS*

#1

craigd

Built another backsaw *PICS*

craigd

Some oak firewood, 20 thou 1095, shop made T nuts and a lot of time with rasps and files. I did the blade slot/spine mortise different from most saws; I cut a constant width slot (on the mill) and shimmed under the spine. A lot less stressful.

10 ppi, 15° rake, 20° flem, the cross cut on oak is glassy smooth. Not a fast cutting saw however.




Re: Built another backsaw *PICS*

#2

Re: Built another backsaw *PICS*

Joe Rogers, Northern Virginia

That is beautiful work.

JR

Re: Built another backsaw *PICS*

#3

Re: Built another backsaw *PICS*

Ron in Sterling CT

That is a great looking saw. Nice work. What is the finish on the handle?

Ron

Re: Built another backsaw *PICS*

#4

Re: Built another backsaw *PICS*

David Churnega

Very nice work. But, aren't you concerned that the handle may be a little too prone to breakage given its dimension on the lower portion?

Re: Built another backsaw *PICS*

#5

craigd

Re: Replies

craigd

Thanks for the comments!

>What is the finish on the handle?

I soaked it in BLO (in a vacuum) and top coated with shellac. It is a completely different color after the oil.

>aren't you concerned that the handle may be a little too prone to breakage given its dimension on the lower portion?

No - it is pretty bomber. This is the third saw I've used that style of lambs tongue on. Also, I spent a lot of effort making it look thin, it still has a fair amount of meat on it. And, I don't think there is all that much stress there.

Re: Built another backsaw *PICS*

#6

Re: Built another backsaw *PICS*

Patrick Gibbons

It looks like something from the movie Barbarella. The curves... Jane Fonda...the curves....

Re: Built another backsaw *PICS*

#7

Re: Built another backsaw *PICS*

Curt Putnam

Impressive! Especially the lambs tongue. Picking nits: not so impressed with the part sticking out of the top but that's just a subjective appearance thing.

Well done!

Re: Built another backsaw *PICS*

#8

craigd

Re: Built another backsaw *PICS*

craigd

>not so impressed with the part sticking out of the top

The "breaking wave" looking thing? I keep them mostly for historical purposes, kinda like nibs on saws. I wonder if there was some reason for them, other than decorative? I keep trying to figure out something else to put there but haven't yet.

Re: Built another backsaw *PICS*

#9

Re: Built another backsaw *PICS*

Curt Putnam

Why put anything? A smooth, sensuous curve would light my fire. Full disclosure: I actually like the look of LV's backsaws.

Re: Built another backsaw *PICS*

#10

craigd

Re: that hump

craigd

>Why put anything?

Good question. My answer: "just because". I haven't used one on hand saws. Maybe because I hates the look of handles of the '50s and later mass produced saws, so drab, so plain, so square. Or the graffiti artist response: no blank surface must go unfilled.

>A smooth, sensuous curve would light my fire. Full disclosure: I actually like the look of LV's backsaws.

That would work, but I haven't found the "flow". It is hard to do, like silences in music, very effective but can be difficult to pull off. The LV (smaller) saws pull it off (one of the few LV designs I like, I dislike the tenon saw handle shapes).

Re: Built another backsaw *PICS*

#11

A hook for hanging

Bill Tindall, E.Tn.

The part would provide a hanging hook. Actually if there was something that this hook would hang on, an arms reach from he bench it would be a handy way to temporarily store the saw. It could then be retrieved by the handle ready to go.

Re: Built another backsaw *PICS*

#12

craigd

Re: A hook for hanging

craigd

Dang, I should learn to listen to the swoosh as the obvious goes sailing by me.

I would never have thought that so I went and played with it - works fine as a belt hook and great for hanging saws on the wall (from a rod).