Finally finished a plane project
CJ in MPLS
A number of years ago I found and purchased a nice tapered plane blade at a flea market. A year later I purchased a chunk of cherry from Woodcraft and 6 months after that, ripped off the sides, cut out the mouth and reglued the plane. Two wedges later the plane worked, but was about 5" over long with a lot of square edges that hurt when the plane was used. This afternoon, approximately 5 years after starting this process, I cut the plane to 8" long and rounded it to form a coffin shape. After a bit of planing and sanding I applied a coat of paste wax and she is complete. The wedge is mahogany and the iron is bedded at 50 degrees.
She works well, but I've only got some rock hard and extremely brittle chunks of maple handy for testing, so no long soft shavings. It did polish the maple quite well though so I'm happy.
Cheers,
CJ






