New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

nose or nosing auger shaping

Posts

nose or nosing auger shaping

#1

Jack Guzman from Maine

nose or nosing auger shaping

Jack Guzman from Maine

I found a nose auger today in a flea market. This is the first of this type of tool I've ever seen close up. The business end is pretty messed up.It is all rounded over and it needs a little reshaping and sharpening to be functional.The problem is I don't know what it is supposed to look like when correct. I couldn't find any decent pictures on an internet search. Anyone know where I can find a decent picture of the cutting edge of one of these tools?---Jack

Re: nose or nosing auger shaping

#2

Re: nose or nosing auger shaping

Larry Barrett

Jack, do you have a copy of Salaman's Dictionary of Woodworking Tools?

Salaman says that nose auger is also called a shell auger and provides a drawing of a shell auger on page 40.

Re: nose or nosing auger shaping

#3

Re: nose or nosing auger shaping

Patrick Gibbons

The Practical Woodworker shows a nose bit and remarks it is a type of shell bit. Both are sharpened by filing the end. It has to be forced into the wood and should be periodically withdrawn to pull out some of the wood core. They're small, up to 3/8" hole.

Re: nose or nosing auger shaping

#4

Jack Guzman from Maine

Re: nose or nosing auger shaping

Jack Guzman from Maine

The one I have is larger. I haven't measured it but it is around 5/8". It is isn't a bit but has a "t" handle permanently attached.---Jack

Re: nose or nosing auger shaping

#5

Show us a picture


Re: nose or nosing auger shaping

#6

Re: nose or nosing auger shaping

AlanWS

Is it the type that is mostly about half a cylinder split lengthwise, but has an angled cutting lip at the end? Leonard Lee's "Sharpening" has a poor picture and says to sharpen the inside of the lip with a file. This is what Lee calls a shell auger, and Garrett Hack in "Classic Hand Tools" seems to call a nose bit.

Or is it more gouge-like at the end? What Hack calls a shell bit is also mostly a hemi-cylinder, but the cutting edge is more like that of a turning gouge with a thumbnail grind and shallow bevel. I think those are distinguished from spoon bits because the edge is part of the cylinder, rather than curved down at the end to hold soup like a spoon.

There are also tools used for cutting out the inside of wooden shoes that are T-handled spoon-like bits. These are used with considerable force, so have solid shafts and the spoon part is wider than the shaft and sharpened at the front and pretty far up both sides.

Re: nose or nosing auger shaping

#7

Stephen Shepherd

Re: nose or nosing auger shaping

Stephen Shepherd

Treat it like a chisel or plane blade and get the outside flat like the back of a plane or chisel blade, albeit slightly curved, but it should be flat.

Then file the inside bevel until the edge is sharp, remove the burr. The edge should have slight camber or belly for a better cut.

Stephen

Re: nose or nosing auger shaping

#8

Is it in-cannel or out-cannel?

Wiley Horne--So. Calif.

Hi Jack,

Stephen Shepherd is a past master at these things. Here is his discussion of out-cannel augers:

http://www.fullchisel.com/blog/?p=103

His post immediately above is about in-cannel--either way, he's the man.

Wiley

Re: nose or nosing auger shaping

#9

Jack Guzman from Maine

Poor photos

Jack Guzman from Maine

Not very clear pics but it gives the general idea. The tip is rounded and shiny. I just need to redefine the shape. I think from what Stephen says I may be able to get it but a picture would be helpful. Thanks for the info.---Jack


Re: nose or nosing auger shaping

#10

Darrell in Oakville

Re: Poor photos

Darrell in Oakville

Jack,

I'm not sure if this is the correct type of bit or not, hard to tell from your photos. The ones I commonly find are sharpened like this:

grind it


hone it




and then use it


next challenge, figure out how to grind those twist bits with the steep angle for wood, like the bottom one here:


Darrell

Wood Hoarder, Blade Sharpener, and Occasional Tool User

feels so weird to have real shop time now that the kitchen reno is done...

Re: nose or nosing auger shaping

#11

Jack Guzman from Maine

Re: Poor photos

Jack Guzman from Maine

That's not it.The tip of mine is a cutting edge .The best way I can describe it is like an old style forstner bit with only one cutting edge and no spur in the center. It cuts an almost flat bottomed hole. I don't know enough about it to shape it correctly and can't find a picture of one. I'll keep searching.---Jack

Re: nose or nosing auger shaping

#12

Re: nose or nosing auger shaping

Patrick Gibbons

Jack, I think you just sharpen the end so that it shaves almost like a scraper. That's the jist of what I got from The Practical Woodworker.

Re: nose or nosing auger shaping

#13

Ship Auger

Warren in Lancaster, PA

Jack I think you have what used to be called a ship auger. Today ship augers have a spiral twist and a flat cutting edge like yours, but in the 19th century they used to have flat cutting edge and no spur at the tip of a pod shaped auger. A little like a Jennings bit without spurs, without twist, and only one cutter. I think the cutting edge should have a little relief on the bottom (maybe 5 degrees) and a bevel on the upper side. I haven looked at one recently.

Here is a drawing from the Sheffield list, but the important parts are not clear. 424 Carpenter's shell auger, 426 Dod's pattern ship auger, 427 Long pod ship auger.


Re: nose or nosing auger shaping

#16

Jack Guzman from Maine

That's it

Jack Guzman from Maine

That should help.thanks---Jack

Re: nose or nosing auger shaping

#17

Darrell in Oakville

Re: Poor photos

Darrell in Oakville

Ahh, OK, now that I see those other pix I think I have something like that. I really do need to find a better way to store these, they are so difficult to access way in the back of that shelf that I keep forgetting I even have them. So they don't get used. *chagrin*

Some are sharp, some not so much. Shortest of these is 14 inches, longest is 18. Gah, I need a better camera than this silly phone.



Maybe you can get some idea of the cutting edge geometry from these?

Darrell

Wood Hoarder, Blade Sharpener, and Occasional Tool User

Re: nose or nosing auger shaping

#18

Jack Guzman from Maine

Re: Poor photos

Jack Guzman from Maine

That will help. Any idea what they called those?Looks like it may me a more modern version of mine.---Jack

Re: nose or nosing auger shaping

#19

Ship augers

Warren in Lancaster, PA

Those are also ship augers, probably from the early 20th century. The ship augers of today have the same type of spiral shaft, but they have a lead screw. They have a single cutter like the old ones, but the edge is straight whereas I think yours and Darrel's are curved edges.

Re: nose or nosing auger shaping

#20

Here in Maine

Bob Hackett

Those types of augers are called barefoot augers. They were used a lot in wood boat building.