New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Viking Chest

Posts

Viking Chest

#1

Viking Chest

Patrick Gibbons

Made a SYP version of the Mastermyr chest for my son. Cold formed the hinges from mild steel then covered them with canola and baked them in the oven- just like seasoning a cast iron pan. Used a bowl adze to dish out the top and a scorp to smooth it. Draw knife and enxo curved the outside of the top. Did a lousy job on clenching nails and fitting joints. Had a dead line. Want to make another from white oak. Would be nice to use green wood. Photo shows from the back to present hinges better.


img

Re: Viking Chest

#2

Re: Viking Chest inside shot 


img

Re: Viking Chest

#3

Re: Viking Chest

Patrick Gibbons

It's hard to see that the sides and ends are canted 5 or 6 degrees. Makes for a bit more difficulty making the joints. The SYP yielded to the adze easily and the top was dished in about 45 minutes to an hour. This is a good project to develop green woodworking skills. Lots of fun even if it's not too impressive looking.

Re: Viking Chest

#4

Neat looking project

Bill Houghton, Sebastopol, CA

Nice work, and what I could see of the customer looks pretty cute! My sons would have loved one of those.

Re: Viking Chest

#5

Nicely done!

Chuck Nickerson

I broke down a redwood slab to make one and the pieces still sit in my shop.

I resized the dimensions a bit so it will hold my woodworking DVD's.

Perhaps Labor Day weekend I'll get it done.

Re: Viking Chest

#6

Re: Viking Chest

Larry Barrett

Hi Patrick

Pretty neat. It would make a good tool box. What is an enxo?

Re: Viking Chest

#7

I'm not Patrick, but I can answer

Bill Houghton, Sebastopol, CA

It's a Portuguese hand adze, see picture below. I believe they also can be had with a radius on the blade.

Never used one, just intrigued by the references I'd seen to them, and, to my surprise, managed to remember them.


img

Re: Viking Chest

#8

Re: I'm not Patrick, but I play one on TV *LINK*

Patrick Gibbons

I got mine from LV about 10 years ago or so. Made by Jaguar in Portugal. The steel is very hard and holds an edge well but is harder to sharpen than your average blade. I find it subs for a broad hatchet pretty well. I've been using it more lately, it takes some practice, and want to improve my technique. I seem to reach for it and/or a drawknife for the same uses and end up with the drawknife, which I feel more used to. I'm trying to change that thinking that familiarity with a new tool will bring new, unexpected results.


http://www.leevalley.com/US/wood/page.aspx?p=20111&cat=1,41131

Re: Viking Chest

#9

Re: I'm not Patrick, but I play one on TV *LINK*

Patrick Gibbons

LV provides this on their site about the adze.


http://www.leevalley.com/US/shopping/Instructions.aspx?p=41472

Re: Viking Chest

#10

Re: Viking Chest *LINK*

Patrick Gibbons

It actually did make a good tool chest. It was found with many woodworking and blacksmithing tools inside. The Mastermyr Project is an attempt to recreate the tools found with the chest.

Don Weber has recently made a DVD on making the chest. Haven't seen it but have great respect for Weber's abilities.


http://www.netlabs.net/~osan/Mastermyr/

Re: Viking Chest

#11

Re: Viking Chest

Larry Barrett

Thanks to both of you for the education. Now that you mention Don Weber I am sure I have seen something not too many months ago about this chest. I have been doing mostly greenwoodworking for many years and have seen hand adzes (but don't have one), but oddly never heard the Portugese term for it - enxo.

Re: Viking Chest

#12

Re: I'm not Patrick, but I can answer

Patrick Gibbons

Bill, where did you find that picture? This adze looks like one in Sloane's Museum of Early American Tools which he calls a Connecticut hand adze from circa 1720. The enxo has no strap. At least the ones made today don't. Very interesting.

Re: Viking Chest

#13

I'm not Bill but I can answer ...

Larry Barrett

Patrick

Type 'enxo' into your friend Google and you will see lots of pictures, some of which are the same or similar to the one Bill put up.