Started building my work bench
AZ in Colorado Springs
Several weeks back I posted some questions about building a work bench. I appreciate all the discussion that ensued. I got a copy of Scott Landis's work bench book, as recommended. It wasn't available at the library, so I bought a copy. It's a great resource.
Someone asked about the moisture content of my fir. It ranges from 5.2% to 10.5%. Equilibrium moisture content here seems to be at or below 5%. (That's the lower limit of the range of my moisture meter, and wood that's been on hand for a year or more doesn't show a reading.)
I've glued up the top. It's 26" wide by 84" long, 3-1/2" thick. Quite heavy ... The legs are 5" by 5".
I'm going to install a leg vise on the front right leg (I'm left handed), with a sliding deadman bewteen the legs. I'm going to build a shoulder vise at the left end of the front edge. The jury seems divided on the utility of the shoulder vise, but I think it's pretty cool, and as someone advised, "build your bench the way you want it." (Thanks for that reminder.) I got hardware for the leg vise at woodcraft, and I'm making my own device for the shoulder vise (my brother manages a foundry and was able to provide a handle for the vise; I'll pair that with a piece of threaded rod).
So, the journey continues. When I figure out how to compress photos down to 100KB I'll post a few.
Thanks
Andy




