New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Log chair build

Posts

Log chair build

#1

Log chair build

Mark

Has anyone here made any Log Furniture?

I am have a property with lots of lodge pole (White) pine 4-10 inches thick .

I have read where it is best to use dead standing pines for building chairs, tables , etc .

Question is, which is best in your opinion for workability and result , or does it matter? ..Dead standing or fresh cut?

Of course if I can find a few dead stands in 4 inch diameter that are not rotted that's likely best .. but what are the cons for using Fresh cut tress if I have too?

My first project is a simple easy chair 28"w x 32"d

Suggestions?

Re: Log chair build

#2

Re: Log chair build

Bill Tindall, E.Tn.

I have no experience building log furniture but I have cut pine trees.

After dealing with the sap from fresh cut white pine I suspect the attractiveness of seasoned pine will become apparent.