New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

lateral adjusting lever question

Posts

lateral adjusting lever question

#1

lateral adjusting lever question

Rick Snyder

Hello.

I have a vintage Fulton plane that has a loose lateral adjusting lever. How do you"repair" this issue.

Thanks, Rick

Re: lateral adjusting lever question

#2

I know it was wrong, but . . .

steve mackay

. . . I "peened" it a bit with the medium nail-set.

Re: lateral adjusting lever question

#3

Nothing wrong with that

Bill Houghton, Sebastopol, CA

They're riveted on, so gentle tightening of the rivet is fine. The trick is holding it; I find a pin punch or similar, held in a machinist's vise, makes a nice anvil, but balancing the frog is tricky. If you have a helper to hold the frog in place, it's a lot easier.

Re: lateral adjusting lever question

#4

Third arm

Ray

Damn, I thought all hand tool users had a third arm.