New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Advice old Columbian 9RB Monster vice

Posts

Advice old Columbian 9RB Monster vice

#1

Advice old Columbian 9RB Monster vice

JBMauser

I snagged this beast today. I do not have a wood vice and need one but this one is huge. I do not have a freestanding traditional wood working bench but simple bench tops mounted to the wall. I could try and sell this monster and take the funds a buy a 7in. vise. I don't have enough bench / wood to mount this beast. I will have to sister in material to support this vise. I guess it can't hurt to have more vise than I need but it may have more value to someone who works heavy stock. Thoughts? advice?

Re: Advice old Columbian 9RB Monster vice

#2

Re: Advice old Columbian 9RB Monster vice

Bill Houghton, Sebastopol, CA

Pictures might help. Is the problem that the length of the vise will result in it banging into the wall? Is it too wide for your benches?

It's frequently necessary to add blocking below the benchtop to accommodate a vise; you might run into that problem even with a 7" vise.

Re: Advice old Columbian 9RB Monster vice

#3

Re: Advice old Columbian 9RB Monster vice

JBMauser

I will take a pic tomorrow, in the meantime think if the biggest wood vise you have seen and then think bigger. I have not tried to mount it, I have to figure out how to block it into place to mount it. it is very heavy. Thus the question to even both with it or deal it out and buy a smaller vise.

Re: Advice old Columbian 9RB Monster vice

#4

Re: Advice old Columbian 9RB Monster vice

TomD


Looks really nice, if it is in good condition I would keep it. Metal vises are always a bit of an ad-on to a wooden bench, so you can just as easily put them on a pedestal or joinery bench. They are great to have, and most are too small. I wouldn't be worrying about your current bench all that much.

Re: Advice old Columbian 9RB Monster vice

#5

Ellis Walentine

Yes, sister it if you need to

Ellis Walentine

Once this vise is installed, wherever, it won't seem so unwieldy. If you need to beef up the underside of your benchtop, that's a small price to pay to have a vise that will hold any size stock solidly. Step into the big leagues.

Ellis Walentine, Host

Re: Advice old Columbian 9RB Monster vice

#6

Re: Advice old Columbian 9RB Monster vice

JBMauser

That is the monster I have. looks a lot more civilized painted. But your vise does not seem to be mounted.

I suppose this could be an excuse to build a proper bench or a wanna be traditional bench.

Re: Advice old Columbian 9RB Monster vice

#7

Concur

Bill Houghton, Sebastopol, CA

Those old vises are worth the effort.

Re: Advice old Columbian 9RB Monster vice

#8

Re: Advice old Columbian 9RB Monster vice

Patrick Gibbons

You've gotten yourself a real vise that has already gone through one lifetime. I'd build a bench to match it and use it. Your work will improve, or at least, your enjoyment. A vise can't really be too big. I would bet you would end up happier once you built a beefier bench. Rock solid is hard to beat.

Re: Advice old Columbian 9RB Monster vice

#9

Re: Advice old Columbian 9RB Monster vice

TomD

I pulled that pic from a thread on restoring the vise. Since it showed up early in my searching, I figured you already had it. Google is your friend.

Re: Advice old Columbian 9RB Monster vice

#10

Jack Guzman from Maine

Re: Advice old Columbian 9RB Monster vice

Jack Guzman from Maine

Unless you never plan on making anything but miniatures,you should find/build a home for that vise. You will use it.I love vises,have them all over the shop. I even have one metalworking vise that I built a shelf for.Just a thick slab,attached firmly to the wall and braced underneath.---Jack

Re: Advice old Columbian 9RB Monster vice

#11

Re: Advice old Columbian 9RB Monster vice

Stuart Hough

JB, you have a great vise there. I got one off ebay about 12 years ago, thinking it was a normal full-time engaged-screw vise. I think I paid $80 =shipping for it, due to the weight. Fast forward to 2008, when I started building my FRWB (First Real Workbench). I too the vise out and rehabbed it, and was pleasantly surprised to find that it was a quick-release vise! I cleaned it, painted it, and somehow was able to mount it correctly, and I am absolutely ecstatic at how smooth and strong it works. My advise is to clean it, mount it and enjoy using it. You WON'T be disappointed!