New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

experimental plane

Posts

experimental plane

#1

bridger

experimental plane

bridger

I use baltic birch ply as a material in cabinetmaking. mostly I use it for drawer boxes, but it gets used other places where a strong dense sheet good is called for. I generally have scrap, so it gets used in jigs and such. I also have a drawer full of random plane parts. so I got the idea to build a laminated plane from baltic birch ply. it worked surprisingly well. I approached it as a quickie experiment, expecting it to fail. it didn't. I just used titebond original- if I were to do it again I'd use epoxy. the blade is union tool, thick and tapered. the chipbreaker is one I found at the back of the drawer. it is low profile like old style woodie chipbreakers. first I tried it with a stanley humpback chipbreaker, but had trouble with adjusting the wedge.

anyhow, some pics:

pic 1

pic 2

pic 3

pic 4

pic 5

pic 6

pic 7

Re: experimental plane

#2

Ellis Walentine

Interesting exercise

Ellis Walentine

This illustrates the essence of a plane -- a fixture that holds an iron at a particular angle and provides a reference surface that determines how that iron cuts. Or, is that too simple? I'm trying to imagine failure mode with your design, and all I can think of is that the relatively soft plies in the plywood will wear more quickly than hardwood (or iron). A hardwood sole might extend the life and improve the performance, but I'll bet it works fine as is.

Thanks for showing this.

Ellis Walentine, host

Re: experimental plane

#3

Noisy one too!

Bruce McCrory

From Pic. 4 I see you need ear protection when using it.

Really neat galoot tool! No cutting--well, the pin--until the end.

Re: experimental plane

#4

bridger

Re: #7 vs #8 jointer plane

bridger

this plywood- baltic birch- is hardwood all the way through. I do expect to see the sole wear into ridges as the edge grain plies wear differently from the end grain plies.

Re: experimental plane

#5

A corrugated plane!


Re: experimental plane

#6

Re: Interesting exercise

David Churnega

Could it be that it will gradually become a corrugated bottom plane with use?