New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Usefulness of Stanley Type 6 bench plane

Posts

Usefulness of Stanley Type 6 bench plane

#1

Usefulness of Stanley Type 6 bench plane

Bill Houghton, Sebastopol, CA

In my travels a few years back, I acquired a Stanley No. 4 bench plane, of Type 6 (1888-1892 production). The frogs on these planes differ from newer ones in that they don't rest on the plane body right at the mouth, instead resting on a low platform a little back from the mouth. I've never gotten around to using it, and am now thinning the herd, and thinking about releasing this one into the wild again.

Has anyone used a plane of this vintage? Theory tells me it should chatter more than a newer one, due to the lack of support at the mouth; but theory and practice aren't always identical. I'd be interested in knowing what experiences folks have had so I can decide what to do with this plane.

Re: Usefulness of Stanley Type 6 bench plane

#2

Re: Usefulness of Stanley Type 6 bench plane

Chuck Bjorgen

Hi Bill -- I have a no. 4, type 6, that was given to me by a friend. Other than rust removal, sharpening the iron and a bit of tuning the chip breaker, I don't use it much. As you know it has the left-hand thread for advancing the iron, a bit of a nuisance at first. Your post prompted me to play with it this morning and it seemed to work fine. I like to have it on hand just to remind myself that a 120-year-old tool can still work. I also have a no. 5 of that vintage although it seems to have some parts from a previous date.

It might be fun to work on these a bit more to try to extract their best performance. I did move the chip breaker as close as possible to the cutting edge this morning and that helped.

Re: Usefulness of Stanley Type 6 bench plane

#3

Re: Usefulness of Stanley Type 6 bench plane

David Churnega

Getting these old ones to work if definitely the greatest joy in collecting. I flattened an architect's desk with a Sandusky coffin, Goodall #4 and a Stanley 102 yesterday.