The Chair - The fingers (pt 2)
Derek Cohen (in Perth, Australia)
A little more work done ...
http://www.inthewoodshop.com/Furniture/TheChairTheFingers%28part2%29.html
Regards from Perth
Derek
Knowledge You Can Build On — Est. 1998
The Chair - The fingers (pt 2)
Derek Cohen (in Perth, Australia)
A little more work done ...
http://www.inthewoodshop.com/Furniture/TheChairTheFingers%28part2%29.html
Regards from Perth
Derek
Re: The Chair - The fingers (pt 2)
john sayles
Derek
an awesome job with what, for me at least, would be a flop sweat-inducing process!
Re: The Chair - The fingers (pt 2)
Philip F Duffy
Derek, I find the whole process amazing, including your ability to show us all how you are doing each step, your corrective actions, etc. I have to ask: Was there a time when Time spent on such joints was of no consequence? It just seems so extraordinary that these chairs were built in some significant numbers and the time consumed must have been enormous. True?
Re: The Chair - The fingers (pt 2)
Derek Cohen (in Perth, Australia)
Hi Philip
I doubt that the factory takes more that about 60 seconds to saw the fingers. A computer-controlled saw makes a half dozen precision cuts. That is all. (I posted pictures of this on one of the posts).
Now my making this machine joint with hand tools - well, that is another matter!
What I have learned from this current exercise is that fitting off the saw is the way to go. I sawed the fingers on the backrest to the line. There was minimal corrections needed. However I decided to play it safe and sawed a little off the line for the matching fingers on the arm. My plan was to be pare and fit - the safe route. But it backfired - much more work and too many opportunities for errors to creep in. The other arm I plan to saw as close to the line as I can!
Regards from Perth
Derek