PATINA
Joe Rogers, Northern Virginia
Any posters plan on attending the PATINA show and sale next month?
Saturday the 15th of March as usual. Good stuff. 
Joe
Knowledge You Can Build On — Est. 1998
PATINA
Joe Rogers, Northern Virginia
Any posters plan on attending the PATINA show and sale next month?
Saturday the 15th of March as usual. Good stuff. 
Joe
Re: PATINA
Paul in NJ
Hi Joe,
I hope to attend this year with my friend John. I will probably tailgate some tools in the parking lot if the weather is half way decent. I wonder if there will be a Todd Hughes sighting. I miss his posts, they were quite entertaining and more often than not there was a nugget of information. I hope he didn't run afoul of a jealous girlfriend or two or three.
Paul Dzioba
Re: PATINA
William Duffield, on the Cohansey
I may attend, as well, Joe. It's a little more difficult for me to get rolling that early in the morning, now that we no longer keep an apartment in the DC area. Also, as my metabolism has slowed down over the years, the weather forecast would need to be a bit more cheerful than it was last year. Hopefully, the latest incarnation of the polar vortex will have dissipated before three weeks have elapsed.
I have a couple of excess tools I would like to convert into cash in order to purchase something new. Might I display them on your tailgate, Paul?
Re: PATINA
Paul in NJ
Would be happy to.
Paul
Re: PATINA
Joe Rogers, Northern Virginia
I'm sure Todd will make an appearance. I have seen him at every PATINA sale I have attended.
Matter of fact last 3 or 4 sales I have seen him stop Tom Price/Steve Reynolds table...and he usually buys something.:-)
I hope to find you guys at the tailgate. BTW be sure to advise the troops you know what you are looking for as the more eyes looking the better!!
Maybe we can find a place to catch lunch...
Joe
Re: PATINA
Tony Zaffuto
Planning on it! Missed last year, for the first time in about a decade, can't have that happen two years in a row!
Re: PATINA
Todd Stock
Was good seeing you WC guys...picked up some nice stuff, and managed to sell most of the surplus stuff still left from my furniture making days. Best/biggest show in the past 5-6 years.
Re: PATINA
William Duffield
It was good to see you again, too, Todd.
Yes, Todd Hughes was in attendance, as well. He had some things to say about his blacksmithing that were a little encouraging.
No one I talked to saw Steve Reynolds or Tom Price.
The weather and the tailgating were the best I've seen it at that event.
Re: PATINA
Joe Rogers, Northern Virginia
I had to go home and take a nap...;-) The tailgating was the best I have ever seen. People were set up from end to end, nearly to the neighbors yards! Hope everyone else had a great day too.
Joe
Re: PATINA
Tony Zaffuto
I made it to the tailgating around 6:45 and left for home around 11 to 11:30! Didn't really see many of the old faces I was looking for, but I did get a chance to handle Isaac/Blackburn Tools saws (Simply great!). Bought a few items and had a good time!
Shock and awe in Damascus
Paul in NJ
No not in Syria, in Maryland at the PATINA Auction.
My friend John and I arrived about 6:30 AM and just barely found a spot to set up our tables. It was still dark and people were searching for bargains with flashlights. The parking lot was a 100 yards plus and it was filled end to end witth tables loaded with tools.

My friend John had priced his stuff low to unload and he did very well, returning home with only 1 plane and two old wrenches. I did pretty good selling probably 75% of my items. I was priced higher but all my tools were tuned and sharpened, ready to go. Here is one of my tables after I sold a bit of stuff:

In the lot besides hand tools for sale was lumber, machinist tools, and power tools. Mostly it was just a lot of vintage hand tools. Lots of saws, chisels, and planes of all types. It was shock and awe for first timers, there were so many tools and choices they didn't know where to turn or what to buy.
Inside at the Dealer sale there were a few less tables than the last time I was there. I thought prices were down a bit and you could negotiate some. It definitely was a buyers market. There were a tremendous amount of tools inside. We did not stay for the afternoon auction.
It was great with good weather and the biggest tailgating session I have seen. You should have been there.
Paul Dzioba
Re: Shock and awe in Damascus
Todd Stock
Saw most of the dealers circulate through the parking lot at least once, and of course I forgot to bring my box of books with copy of Walter which I was selling...saw one for $350 inside and a busted up one for $175...amazing! As noted, the tailgating was crazy...really needed to have set up parking behind the area, but with so much snow melting, everyone stayed close to the gravel. I was amazed at the prices...got a NIB German-made cello caliper for $65, plus some new Knipex end cutters for $10, and some 4" and shorter mill bastard and smooth files. Was looking for cam clamps and did not see any, but otherwise very good selection and folks definitely had money to spend (my table cleaned out by 9...took home a 39-3/8, a shockproof square, and not much else).
Really miss Tom Law...I automatically make a right turn at the door and proceed along wall...big space to fill.
Re: Shock and awe in Damascus
Tony Zaffuto
Tom Law's son was set up outside and his widow and daughter set up inside. Though I didn't need them, I bought a few saws out of the remaining 500 his family still has. Felt weird buying the saws, but they'll be treasured. Tom sharpened more than a few of my saws until he quit and after that, I bought a few re-habbed saws from him. Yeah, and I agree it felt weird going in the door and not seeing him set-up on the right.
For what they were selling, they were bargain prices for probably the best cutting saws in the country ($25 to $35 each). Saw a dealer (will not mention his name) grabbing saws by the handful. Probably see them on his internet site or that unnamed auction site at 5 times what he paid.