New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

a good haul for oldtool hell... and a request for

Posts

a good haul for oldtool hell... and a request for

#1

bridger

a good haul for oldtool hell... and a request for

Bridger

I picked up a few things at a resale shop.

https://24.media.tumblr.com/c4e8c2a930417db7caafdea9b8b918d4/tumblr_n0pba63Rip1qhrm32o1_1280.jpg

http://24.media.tumblr.com/9807a01d903120aca667d0ef9d2a0a18/tumblr_n0pbopvhQE1qhrm32o1_500.jpg

http://25.media.tumblr.com/927bb6dc15056d7cebca1cdb88344235/tumblr_n0pboabAyj1qhrm32o1_500.jpg

http://24.media.tumblr.com/b7826160e8307452f680d09815becfea/tumblr_n0pbnzcv2T1qhrm32o1_500.jpg

the damage: just over twenty bucks. the plane is a bit late to be very desirable, but I figured the rosewood tote and knob were worth the $12 price tag. the stanley auto- directional drill for $4 was too nice to pass up. it appears to be in perfect shape. the little prybar will go straight into a grab-and-go toolbox, so even though the price was close to new retail I'm glad to have it. and last but not least, the atkins saw filing multi-tool, which a quick check with the google indicated was complete except for instructions. anybody here have and use one? got maybe a scan of the directions, and/or comments as to the viability of this as a useful device?

Re: a good haul for oldtool hell... and a request for

#2

Re: a good haul for oldtool hell... and a request

Bill Houghton, Sebastopol, CA

Those little prybars - which I've seen sold as beekeeper's tools mainly, altough Hyde Tool figured out they're a good painter's tool, too - are flat fantastic for remodeling work. I own two, and am grateful for them every time I have to pry molding off without damaging it.

The drill looks just like a North Bros. Yankee 1530 drill. You said "Stanley." Stanley acquired North Bros. in 1946, and continued many of their tools; I hadn't realized they'd continued that drill, which is one of the finest small drills made, in my opinion (the larger 1545 is, again in my opinion, superior to the Millers-Falls No. 2 that most folks point to as the acme of mid-sized eggbeater drills).

The saw tools are, I believe, designed for use with timber-cutting saws, rather than shop saws. Still neat to have.

And a nice, clean-looking jack plane. I'd say you did well

Re: a good haul for oldtool hell... and a request for

#3

Yankee 1545 drill

Patrick Gibbons

Bill, I think it's unfair to compare the Yankee to a Millers Falls #2. It's like comparing a 64 Ford Falcon to a Mustang. One was basic transportation, the other was the fountain of youth. Both sold well. The Millers Falls will do 90% of what the Yankee will do and probably serve both amateur and professional well. The Yankee has two speeds, forward and reverse, double pinions and a spindle lock. It is so head and shoulders above the Millers Falls it's scary. The Yankee is better. It has more bells and whistles. The #2 is solid. It's a good benchmark.

Re: a good haul for oldtool hell... and a request for

#4

Re: Yankee 1545 drill

Bill Houghton, Sebastopol, CA

The early Mustang was built on the Falcon frame, and the deficiencies resulting from that are pretty thoroughly documented; but that's for a different forum.

I would not have brought the comparison up but for the fact that many people wax eloquent about the marvels of the M-F No. 2, but those of us who know and admire the 1545 are fewer in number. If I didn't already own one, of course I'd be dead silent on their virtues :D . But for those just starting to build the kit, I'd recommend putting a Yankee 1545 on the quest list.

Since I'm not Christopher Schwarz, I feel comfortable making this recommendation, knowing that it will have little to no effect on the street price for these marvelous drills :D x2.

Re: a good haul for oldtool hell... and a request for

#5

Re: Yankee 1545 drill

Patrick Gibbons

You're right, of course. I have the Millers Falls and, while I am satisfied with it, admit it is indeed number two when compared to the Yankee. Implied humor should be read into the phrase. I am always tempted to characterize Yankee products as over engineered but that implies they were fussy and temperamental. That is far from the truth. They were robust tools made for true professionals.

Re: a good haul for oldtool hell... and a request for

#6

bridger

Re: a good haul for oldtool hell... and a request

bridger

I mistyped. it's a yankee. corrected.

other than the wood handle being a little loose it seems to be in very good condition. I haven't drilled a hole with it yet, but I'm looking forward to doing so....

Re: a good haul for oldtool hell... and a request for

#7

Dominic in Bucks County PA

Re: Yankee 1545 drill

Dominic in Bucks County PA

Here's a shot of a Yankee 1545

The yellow arrows indicate lube points and were part of a small article I wrote on disassembling and cleaning the drill


img

Re: a good haul for oldtool hell... and a request for

#8

Dominic in Bucks County PA

Re: Yankee 1545 drill

Dominic in Bucks County PA

And here is a side by side shot of a Yankee 1545 and a MF No2

You can see the size difference quite clearly.

The Yankee 1545 is my "go to" drill for larger holes. While the LR ratcheting is VERY cool, IMHO the speed selection switch is by far the most useful features to ever be added to a eggbeater. Especially if you are using this on metal.

But the one eggbeater I use the most is the one you snagged. The Yankee 1430. When they are cleaned up properly they work like a sewing machine.

Saying that I have a "thing" for Yankee tools is like saying Almelda Marcos "sort of liked" shoes.

BTW, if you are looking for a Yankee 1545 I have a couple that I'm cleaning up right now to sell. Email me at Dominic@tgiag.com if you are interested.


img