New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Ash Box...

Posts

Ash Box...

#1

Ash Box...

Scott in Douglassville

Hi, all -

Started this box for my son when he was about 3, as a sturdy rock box. He turns 14 this week. Yow. Started out as a power tool project, but was largely hand tools for the later work. As such, consider it a hybrid project.

As a rock box, I was more interested in resiliency that appearance; I was making a bench at the time, had a surplus of ash, so I planed some down. Mitered the sides, checked the fit with band clamps, then got distracted. The box has sat, in the band clamps, ever since. Planed some walnut a while ago for the top and bottom, summarily lost the pieces, and put it on the back burner again.

About a month ago I cleaned out the garage. The shop's usable again. Decided I'd finish this box. Found some more walnut, but wasn't really excited about it. One afternoon, napping, it occurred to me that the box should be entirely ash (I love ash), and I should find some figured ash for the top. Woke up (seriously) and found a 4x4 cutoff of a bench leg that's been sitting on the bench as long as the box had been. Resawed it, reverse diamond matched the pieces, and the top was born. Resawed a plank for the bottom, got after it this week, and today it's finished.


My son has long since moved on from his child's fascination with garden rocks. The box is destined to be filled with Hershey Kisses and Wint-O-Green Lifesavers, and will perch on my desk at work.

So, all ash, splined with ash, finished with lacquer. Knock another off the long-term project list.

Thanks for looking.

Scott

Re: Ash Box...

#2

Re: Ash Box...

Bill Houghton, Sebastopol, CA

Nice looking little box.

Our younger son loved rocks, too, even going so far as to set up a rock stand (similar principle to lemonade stand), selling the good ones he'd found. Didn't make a fortune.

Re: Ash Box...

#3

Jack Guzman from Maine

Ash

Jack Guzman from Maine

I didn't appreciate ash until just recently. My neighbor took down a big ash in his yard. He gave me a piece of the trunk close to the bottom that was fairly straight. I used it to make all the round elements in a windsor style settee. The turnings for the legs came out beautiful. That box top has some really nice grain.I had no idea ash could look so good.---Jack

Re: Ash Box...

#4

Re: Ash Box...

Bruce McCrory

Isn't the table it is on also ash? They are both beautifully grained.

Re: Ash Box...

#5

Re: Ash Box...

David Churnega

Thanks for the story. Nice work.

Re: Ash Box...

#6

Thanks, guys!

Scott in Douglassville

I appreciate your kind words. I'm fixing to start carb cycling - not sure what to put in the box now!

Re: Ash Box...

#7

Re: Ash Box...

Scott in Douglassville

Thanks, Bruce. The table is a walnut candle stand I made years ago that has, somehow, survived my kids.

Re: Ash Box...

#8

Re: Ash

Scott in Douglassville

Jack, I turned a bunch of chair parts from an ash tree a neighbor felled a number of years ago. Turns beautifully and holds detail well, if a bit open-grained compared to typical chair woods.