Stanley (or LN) 750 handles
Steve Voigt
Hi folks,
Does anyone have a drawing for the 750-type handle? Or for the LN bench chisels, which I believe use the same handle pattern?
Failing that, would anyone be willing to make some quick measurements, with calipers, of a 750 (or LN equivalent) handle? I would only need 3 measurements:
- the length of the short taper that lines up with the outside of the socket (basically, the top part of the handle).
- the diameter of the narrowest portion of the handle (right behind the taper).
- the total length of the handle.
Thanks very much in advance.
- Steve




