New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

LV mini router

Posts

LV mini router

#1

Jack Guzman from Maine

LV mini router

Jack Guzman from Maine

I repaired a high chair today. The tray broke in half along a glue line where two boards were glued together to form the tray. Besides cleaning the seam and regluing I decided to add a couple dutchmen to reinforce the joint. I found that the best tool for leveling the bottom of my mortises was the mini router. A 271 was just a little too big for the job. That little tool did the job with ease.---Jack

Re: LV mini router

#2

Re: LV mini router

Bill Houghton, Sebastopol, CA

I've looked at the LV miniatures with a somewhat jaundiced eye - they seemed just too small to do the job. You're the second, or maybe third, person to have commented on their perfection for a particular job. Maybe they need to go on my wish list for hinting about near birthdays.

Re: LV mini router

#3

I keep eyeballing . . .

Steve Mackay

. . . that thing. You may have just tipped the balance.

Since you have it, do you find more uses for it ?

I really like the mini shoulder.

Re: LV mini router

#4

Jack Guzman from Maine

Re: LV mini router

Jack Guzman from Maine

My wife gets them for me for Christmas. The mini shoulder plane works for cleaning up rabbets in tiny boxes. If you do any miniature work these tools are totally functional and made to LVs high standards of quality.I have them all.---Jack

Re: LV mini router

#5

Jack Guzman from Maine

Re: I keep eyeballing . . .

Jack Guzman from Maine

Yes,I do. See my reply to Bill for the shoulder plane.---Jack

Re: LV mini router

#6

Re: LV mini router

Bruce, a MN Galoot

My daughter gave me the mini edge plane this year. Only the block plane to go...

I've used both the mini router plane and shoulder plane quite a bit, definitely more than I thought I would. Besides, they are so DARN cute!

Re: LV mini router

#7

Re: LV mini router *LINK*

William Duffield

I can add my endorsement to these tools. I use both my mini-shoulder plane, 05P80.01, and mini-router, 05P82.01, and they work well for me.

Note that there is no depth stop on this router plane, and no lateral set screws on this shoulder plane, but it does have a Norris adjuster.


Lee Valley Miniature Tools

Re: LV mini router

#8

Re: LV mini router

Neal in San Jose

And while we are talking up the minis, I'll throw in a success story for the block plane. When I moved into my new digs, the cabinet doors above the refrigerator would drag on the top hinges of the refer. I didn't want to take the doors off to trim off the bottom since it is awkward to lean over the refer while standing on a ladder, not enough space for a full size plane, so I used the mini block and it worked a treat!

Re: LV mini router

#9

Jim in Burlington Ont.

Re: LV mini router

Jim in River Oaks, Ont.


I love my LV Mini router, I use it often when doing fine recess or surface work, here I a showing how I used it last year to remove wood to allow for an inlay,

Take care,

Jim