Topic suggestions for the Hand Tool Chat?
Topic suggestions for the Hand Tool Chat?
#1
Knowledge You Can Build On — Est. 1998
Topic suggestions for the Hand Tool Chat?
How about finishing?
Bob Entwisle in NJ
Well, since it's where I am on a little project. How about finishing?
Bob (in NJ)
Re: How about finishing?
Stuart Hough
We might get a good bit of "coverage" on that, or we might just "raise the grain"!
Oh, we covered it, and the 'grain' overflowed
Bob Entwisle in NJ
the banks and we floated off on tangents no one who wasn't there would believe!
Thanks to all for another extremely enjoyable "2 hour+" chat!
Bob in NJ
Re: Topic suggestions for the Hand Tool Chat?
William Duffield
How about something inspired by the prototype "MFT"* you recently showed on youb blog.
"Dowels, Dogs and Drying" or something. That contrivance has almost as many holes as my Swiss cheese bench. Also, I'm curious about the functioning of your holdfasts, given the relative thinness of your work surface and the large diameter of the holes.
*Festool Multi-Function Table: http://www.festoolusa.com/power-tools/work-tables/
or maybe this one:
http://www.leevalley.com/US/wood/page.aspx?p=31153&cat=1,41637
Re: Topic suggestions for the Hand Tool Chat?
Adam of Oakland
Hi William - what blog post are you referring to? discussing that MFT contraption by Festool would be interesting grist for the mill next week...never saw it before, looks a little bit too anal retentive for me, but would like to hear what people thought about it.
I enjoyed last night's chat, good tangents and some experience on finishing is always welcome. I learned i need to experiment with something beyond my watco danish oil, and also that I will set aside Titebond III for a hide glue on my next indoor project.
(I also learned that I have a LOT to learn about ludwig wittgenstein and that _Stephen is a resident expert on that topic)
Re: Topic suggestions for the Hand Tool Chat?
William Duffield
It's Stephen's latest post on his Full Chisel blog.
http://www.fullchisel.com/blog/?p=4487
The reference was a feeble attempt at humor. The Festool MFT is part of their system, and as such is designed to work with their track saws and other power tools. By itself, you probably wouldn't find it very useful, especially if you use mostly hand tools, or even if you use a table saw to do most of your joinery and stock preparation. Although I have several Festools, I don't have an MFT. I prefer more traditional methods of work holding, and benches with much sturdier legs. I suppose I could say that the Festool system was designed for building Euro kitchen cabinets on site, but that would be too restrictive. In any case, discussing the MFT, or any other Festools would probably not be a very appropriate subject for a hand tool chat.
I'm sorry I missed this week's chat. Evidently, it was very interesting, and a logical follow-on to last week's discussion on grain filling. OTOH, maybe my usual practice of tangentializing would have been distracting.
Here's the log file, in case anyone's interested *LINK*
Chat Log, Tues. 11/19
Ellis, a request...
Denis Chenard in Ottawa
Would it be possible to make all the logs accessible? Sometimes there's a chat that I can't attend but would like to read the insight of our esteemed members, I tried to access the folder that you linked to but the access is denied.
Thanks,
DC
Sorry, Denis
Ellis Walentine
It's too much of a hassle to make these logs available every day. They aren't housed on my server; they are e-mailed to me daily and I have to archive them individually if I want to upload them for your perusal. The best I can offer is to try to accommodate you on any that you specifically are interested in.
I wish I had the time and the budget to do everything.
Ellis