New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Sharpening nailsets

Posts

Sharpening nailsets

#1

Sharpening nailsets

Bill Houghton, Sebastopol, CA

I'm in the midst of nailing off a beadboard ceiling. It is amazing how many 4d finishing nails there are in a five pound box, and I think I'll be down to under a pound when I'm done.

The nailset that started the project is now kind of rounded off at the tip, and slipping. Fortunately (thanks to years of garage sale attendance), I have a couple of backup nailsets the right size; but it would be nice, down the line, to get the one I was using back in service because it's wrapped in bright plastic, easy to find if I drop it when working outside.

Nailsets come with a dimple in the driving end, making for a circular striking tip. This would be hard to reproduce, and I've seen, somewhere, a recommendation to grind a shallow point on the set, like a center punch but more obtuse. Has anyone tried this, and how did it work?

Re: Sharpening nailsets

#2

Re: Sharpening nailsets

Bruce, a MN Galoot

After cleaning out my aunt's garage containing my grandfather's tools from 80 years ago, I'm left with a plethora (yes, an entire plethora!) of nailsets. I've wondered the exact same thing. All I've ever done is file or grind the end completely flat and hope for the best.

Re: Sharpening nailsets

#3

Re: Sharpening nailsets

Patrick Gibbons

Perhaps you could use a Dremel with an appropriate bit and regrind the dimple. Don't know how the temper would hold out.

Re: Sharpening nailsets

#4

Re: Sharpening nailsets

Bruce, a MN Galoot

I have a drill press for my Dremel and some small cone-shaped grinding stones. That might work. OTOH, ya gotta wonder just how cheap I can get :D

Re: Sharpening nailsets

#5

bridger

Re: Sharpening nailsets

bridger

grind a nailset with any kind of point and you've created a center punch. it won't make a satisfactory nailset- it'll just punch through the head of the nail. I generally dress the sides to remove any mushrooming and grind the tip off flat. I also have a dozen or so in a drawer waiting for a need. it's gotten so I pass them up at yard sales if they are over 25 cents...

Re: Sharpening nailsets

#6

Depends on the head of the finishing nail.

Chuck Nickerson

If the finishing nail's head has an indentation then a pointed nailset works great.

Just make sure the lowest 1/4" of the nailset is smaller than the nail head. DAMHIKT.

If the nail's head does not have a dimple (yes, they do sell some that way now), then

size the shaft to just match the nailset's head then use a 135* drill to recess the

center of the nailset's working tip.

The issue of mushrooming, if it raises it's ugly head, can be solved by only using the nailset

for the last blow.