New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Off topic: cuttin carpet pad

Posts

Off topic: cuttin carpet pad

#1

Off topic: cuttin carpet pad

Bill Houghton, Sebastopol, CA

We're getting a new rugs, which has a pad in two layers: one layer looks kind of like a Scotch-brite pad, or the sweepings from the Scotch-brite factory floor; the other is a rubbery membrane. We have the same pads under existing rugs, which came larger than the rugs. I never did find a suitable tool to cut them. Scissors, sheet metal snips, razor knife - everything was defeated. Does anyone know what the right tool is for this purpose?

Re: Off topic: cuttin carpet pad

#2

Jack Guzman from Maine

carpet knife

Jack Guzman from Maine

Carpet layers use a tool that has a blade that is shaped like a large double edged safety razor blade. I think what makes it work is the slightly rounded edge. It doesn't catch on fibers the way a pointed edge will. Any place that sells flooring should have them.---Jack

Re: Off topic: cuttin carpet pad

#3

Re: Off topic: cuttin carpet pad

Bruce, a MN Galoot

What has worked best for me is any really sharp knife, like a new utility blade. Jack's suggestion would work really well. But the secret is to smash the stuff as flat as you can get it, e.g., by kneeling on a piece of plywood used as a straight edge, and then cutting right next to that. I do a similar thing when cutting thick fiberglass insulation.