New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

18th c. turner's shop *LINK*

Posts

18th c. turner's shop *LINK*

#1

18th c. turner's shop *LINK*

Warren in Lancaster, PA

A few weeks ago I was demonstrating the pole lathe at the Hay Creek festival as I have for 32 years. I met a man from Oley, Pa whose name was Keim. The family is interesting to me because it was one of the French families living in Oley when my ancestor lived there 1733-35. After a while he starts talking about the Jacob Keim house and says Jacob was a turner and in the shop still has evidence of pole supports on the ceiling and depressions in the floor from the treadles. He said there would be an open house in a few weeks.

I managed to find this old picture of the interior on line, but I was sure the place had been restored covering up interesting details. Note the lathe pole support partly in back of the stairs. The house and shop were built in 1753, at which time Jacob Keim was already listed as a turner.



When I visited on Saturday, it looked like nothing had been done to the interior for at least 150 years. There were three different pole supports in the ceiling joists and two places where treadles had worn the floor. Also some racks for turnings and tools. I was able to estimate a pole length of about 14 feet. The house itself was very interesting. Apparently the family were still cooking in a walk in fireplace until 1911 and since then a few tenants had lived in half the house.

Here are some lathe supports in Hulot




Keim Homestead

Re: 18th c. turner's shop *LINK*

#2

Re: 18th c. turner's shop

Wiley Horne--So. Calif.

Hello Warren and all,

Extremely fine and detailed post, Warren. I'm sure that your finding yourself in the actual more-or-less untouched home where Jacob Keim did his pole lathing about the same time as your ancestor was living in the same vicinity was a tremendous moment in your life.

I find a few other things of great interest. The German bank barn/building for one. There must be lots of those in Pennsylvania. But that old? And the limestone construction--what did they cut the limestone with? How was it quarried? Wow, things were tough back then, and the people too.

Wiley

Re: 18th c. turner's shop *LINK*

#3

Bank Barns

Warren in Lancaster, PA

Bank Barns have been a tradition in Pennsylvania since the early 18th century. I have been to raisings for bank barns in this century and the last. The idea is that the livestock is on the lower level of the barn and there is access to get a wagon to the upper level from the other side. If the slope of the land is insufficient, there is a barn hill (earthen ramp) to the upper floor.

Stone cutting is done the same way today as years ago. A large stone is split up with a stone sledge, maybe 12 pounds with a blunt edge on one face. The mason strikes the stone repeatedly along the line where he wants it to split. For smaller cuts a 3 pound stone hammer is used. I takes some skill and experience to turn a rock into rectangular building blocks. Sometimes a hammer and chisel is used for fine dressing.

Stone work is alive and well in my little corner of the world. Stone walls are seen as more esthetic and more permanent. One of the bank barns built recently in our neighborhood was 50 x 120 with stonework on the long wall against the earth and sides. One neighbor has land on both sides of the road with a stream running under the road. He talked the township into letting him tear down the little bridge and building a higher stone bridge there so his horses could get to the pasture across the road on their own. I often wonder if people realize they are driving over a bridge designed and built by a guy with an 8th grade education, using a horse and wagon, a few hammers, and a couple of kids.

Re: 18th c. turner's shop *LINK*

#4

Re: Bank Barns

Patrick Gibbons

It's interesting to me that the family didn't stay in turning. Makes me wonder if it was because of economics or preferences.