New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Footnote on Starrett blade interchangeability

Posts

Footnote on Starrett blade interchangeability

#1

Footnote on Starrett blade interchangeability

Wiley Horne--So. Calif.

Most of you will know this, but just in case...

Today I was doing a fit-up of a small writing desk, and marking out for the drawer dividers and drawer guides. I needed a square which would reach back 14 or 15" into the case, registering off the front rail. For longer fixed squares, I have 9, 12, and 18--either too short or too long.

Then recalled that I had bought an 18" blade which would fit my 12" Starrett combination square. Success! Joel's Starrett 'wizard' points out that the 12", 18", and 24" blades are all interchangeable on Starrett combination squares.

This can be handy for checking or laying out case internals.

Small point, but...for what it's worth,

Wiley

Re: Footnote on Starrett blade interchangeability

#2

Re: Footnote on Starrett blade interchangeability

Winton

Wilie,

Cool thank you.

Off topic but I don't know what the flip up on a writing desk is.

Will you educate me.

Re: Footnote on Starrett blade interchangeability

#3

Re: Footnote on Starrett blade interchangeability

Winton Applegate

Wiley,

sorry I spelled your name wrong; posted on iPad and now won't let me edit it. :(

Re: Footnote on Starrett blade interchangeability

#4

Re: Footnote on Starrett blade interchangeability

Wiley Horne--So. Calif.

Hi Winton and all,

The term is 'fit-up'. Thanks for asking--it may not be as standard a term as I thought.

In a piece of furniture that consists of a lot of pieces, I find it necessary to put the completed pieces together during the build, in order to ensure things come together square and plumb, joints close completely, and to make decisions on things that are hard to decide on paper such as the thickness of legs and drawer dividers, and make final decisions on ornamental details.

There will be a number of fit-ups before it's all done, because everything I make, I'm making for the first time--the whole project is a prototype. So there are lots of uncertainties that are resolved by looking at the thing in the flesh as it develops.

This particular fit-up was to double-check the squareness of the drawer box, and to make sure the drawer guides at each side, and the dividers between the three drawers will be square to the front rail and parallel to each other all the way back. This step obviates (for the most part) planing inside a glued-up case at a later stage, trying to get the drawers to fit.

Wiley

Re: Footnote on Starrett blade interchangeability

#5

No problem!  Been there, done that.


Re: Footnote on Starrett blade interchangeability

#6

Sent you an e-mail


Re: Footnote on Starrett blade interchangeability

#7

Re: Footnote on Starrett blade interchangeability

Winton

Flip vs Fit

I supose it would help me see straight if I would wake up before attempting to read forums.

Sorry.

I am looking forward to seeing the finished desk !

Any chance of a photo or two ?

Re: Footnote on Starrett blade interchangeability

#8

Re: Footnote on Starrett blade interchangeability

Patrick Gibbons

The factory seconds PEC squares that Epstein's have for sale gave me an opportunity to get a combo square and longer blades. Their 12", 18" and 24" rules work on the same square too. There have been several times I've needed a longer measure. They're not necessities but they are nice to have. I do prefer the Sterrett but it's what I'm used to. The PEC seems to be a heavier item with good quality and legibility.