We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
Going on another mission trip and I swore I was done with plastic bucket for tool hauling. Those with any memory at all will recall that I have been stewing about this for awhile. As you are aware there are several options. Many appeared to be way too much work for not a whole lot of use. I did this in 2 and a half hours. 1 x 12 from Lowes, glue and cut nails. A little weird since I do not use Japanese tools, but it seemed just the ticket for me. I may arrange the bottom with some strips to keep planes from sliding around and i probably will make up some kind of till for the three saws that I will carry,but there is not much sloshing around in there. Inside dimensions 30 by 11 1/2 by 10 3/4
Panel 7 pt rip, panel 8 pt x cut, 14 in tenon saw that works for dovetails, Fray Spofford brace wit set of Irwin augers, Stanley 5, Stanley 4, Veritas block plane. dividers, chalk line, bevel gauge, marking gage, 12 and 6 in squares, medium and fine stones. Oil, six ft tape. Leather apron with pencils, etc. eggbeater w pilot and countersink bit. May take moving fillitster and small plow. Oh yes, i have some Miller Falls chisels that My dad gave me 45 years ago. I use them for carpentry stuff.
A handy tool box is just a quick trip to the store and a couple hours of work away
Buckets can be handy, I have a ton of them, we use them for feed, mixing plaster, and catching rainwater for our futile attempts at growing plants (I couldn't grow kudzu ) I don't remember ever using one for tools, at least not voluntarily.
The ends of the box are recessed 3/4 in. A 3 1/2 in wide strip is glued and screwed to the top of the sides. This piece has a bevel planed on the inside bottom corner. Makes handle.
Ron. Who copied the whole idea from some Japanese tool guys