New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Outfit me for saw sharpening

Posts

Outfit me for saw sharpening

#1

Outfit me for saw sharpening

Tony Wilkins

Asked about whether I should try sharpening saws (starting with my Disston D8 thumbhole rip). I finally decided to give it a try. Various tools have been thrown out there for me to get and I've watched a few videos.

However, so I'm sure I get everything I need, help me by listing out what I need to get (including brands etc).

TIA,

Tony

Re: Outfit me for saw sharpening

#2

You might read through these articles *LINK*

Bill Houghton, Sebastopol, CA

Pete Taran's site is widely seen as one of the best. Link below. He was also kind enough to write an article here on Wood Central: http://woodcentral.com/articles/handtools/test.shtm.

As to particular file makes and so on, search for threads. For some reason, WoodNet's got more people who are really passionate about saws, and searching or reading through their hand tool forum, in addition to here, will give you a lot of information.


http://www.vintagesaws.com/cgi-bin/frameset.cgi?left=main&right=/library/library.html

Re: Outfit me for saw sharpening

#3

Re: Outfit me for saw sharpening

Chuck Bjorgen

I'm currently going through this process, although I started acquiring saws and their sharpening needs around 12 years ago. This was put aside because of a ten year detour into woodturning but I just came back to the hand tool mode last year and have now started my saw sharpening. By all means, pay attention to the online sites being mentioned by others. I regularly refer to Pete Taran's library of articles. But just to get started, I'd recommend:

Buy the tool roll set of saw files from Lee Valley. You may not need all the file sizes right away but at least you get an assortment that may be useful down the line.

I also bought the saw file holder from Lee Valley. You can make jigs from wood to help maintain various angles but the LV jig makes it easy.

You'll need a saw vise. Make your own or pick one up on the bay. I've acquired several this way but they all seemed to be lacking. I finally had the cash to pick up the Gramercy vise from Tools For Working Wood. It's expensive but I love it.

You'll need handles for the files and these are available from LN, Lee Valley, TFWW and eBay. I also bought the Bausch and Lomb Magna Visor for filing the saws with smaller teeth.

On that note I'd recommend working on the larger toothed saws first in order to get a handle on how it's done. You should get lots of recommendations here.

Re: Outfit me for saw sharpening

#4

Agree with Chuck


Re: Outfit me for saw sharpening

#5

Re: Outfit me for saw sharpening

Derek Cohen (in Perth, Australia)

Hi Tony

My own needs focus on backsaws rather than panel saws. You may require a larger saw vise than I have, which is a Disston 3D.


I lined the jaws with leather, and I am very happy with this vise - it is solid, has no vibration, and is easy to set up.

I would recommend the Veritas saw file holder. It is a simple, easy-to-use guide that works pretty intuitively.


You need a few files. The sizes depend on the saw teeth you are shaping and sharpening. I've been getting my files from Lie Nielsen for some years, mainly because they stock the Swiss Grobet (which recent sources indicate that all Grobet, Swiss and USA, are made in Pakistan!). There has been a recent research project eminating from the Australian forum: http://www.woodworkforums.com/f152/saw-sharpening-files-101-a-171926/index46.html

This LN table may help:


I also have the Magni-Focuser they sell. This, plus decent lighting, makes it easy to see the teeth.

Re: Outfit me for saw sharpening

#6

Re: Outfit me for saw sharpening

Kees

Bahco files are also pretty good. And cheap, made in Portugal. They don't have the smallest size, which is a pitty.