"Cousin Fred’s Wonderful Woodworking Shop"
Bruce, a MN Galoot
This is one of my most favorite articles from FWW, a bit old now, but then so am I. It expresses a lot of my own ideas better than I can. Given some of the recent discussions here, it just seems apropos. I have shared this with a couple WC members in the past.
Written by W.W. Sauer, it was originally published by Fine Woodworking magazine, Dec 1985, Issue # 55. It is reproduced here with the permission of FWW.
Here, then, is "Cousin Fred’s Wonderful Woodworking Shop":
Though I hadn’t seen my cousin Fred for many years, his annual Christmas letters mentioned his woodworking hobby and his wonderful new shop. So, on a recent trip, I decided to visit Fred and to see his new workplace. After a brief chat, Fred took me to the lower level of his house, and with a dramatic gesture, opened the doors to show me his pride and joy. I almost gasped when I saw the 30-ft. by 30-ft room. Superbly lighted with fixtures recessed into an acoustical tile ceiling, it had oak-paneled walls and a tile floor that gleamed with wax. Set off by windows that opened onto a patio was the largest cabinetmaker's bench I had ever seen. Nearby stood a huge tablesaw. Fred proudly showed me how easily and accurately the rip fence marched across its shining surface. An 18-in. thickness planer was next, followed by an 8-in. wood lathe, and other expensive new machines. Fred mentioned $1,800 for his latest acquisition. And, joy of joys, each large machine was connected to a central dust collector. But the best was yet to come. One wall was covered with a custom-built oak cabinet fitted with wide, shallow drawers. Fred slid one out on its double-extension slides, and there, resting on green felt, each in its fitted holder, were 32 chisels, bevel-edge, mortise and paring, each crisply sharpened and oiled. The next drawer held 28 screw drivers, from tiny watchmakers’ blades to a huge, gorilla model. A drawer of expensive wooden planes followed, another of pliers, then saws, hammers, measuring devices and squares, files from needle to rasp. Later, Fred’s wife and other family members joined us and moved from one tool to another with appropriate admiration. Fred followed with an orange shop rag wiping off finger prints. Finally someone asked, “Fred, what do you make in your shop?” The answer came quickly from Fred’s wife, who has never been noted for tact. “He hasn’t made a thing in 15 years and I know it’s 15 years because that's how long we've lived here!" Fred withered, orange rag and all. On the long drive home I thought a lot about that wonderful shop and my own workplace. For years I had planned to enlarge my shop and update my equipment. Why not do it now? I could rationalize the expense as a retirement gift to myself. The plans grew as the miles slipped by. I would start with a new tile floor, a dust collection system, new wiring and lights and new paint.... Next morning, anxious to start, I opened the door and surveyed the shop that had served me well for 35 years. The 9-ft. by 22 ft. room seemed tiny compared to Fred's. The plywood floor was badly scarred. The storage drawers were made of cast-off plywood. My 10-in. Sears tablesaw cost me $169.95 in 1952, and that included a 1-HP motor. How I had saved for that old saw. My 6-in. jointer made by some long forgotten company cost me $12.50, used. The 7-in. planer seemed toylike compared with Fred's giant. I sat down on the rolling stool I'd made, when age decreed such a move, and pulled my shop log book out of a well-filled drawer. It contained a list of all my projects for the 35 years. It was always a pleasure to read it over. Six tall-case clocks, eight shelf clocks, chess boards, a cannon model, a wall cabinet that I feel James Krenov might glance at for a moment, dozens of little decorative boxes. On and on went the list, each piece made possible by faithful old tools. I know the shortcomings of each one, the rip fence that has to be squared up for each cut, the chuck that falls off the drill press. In turn each tool knew my shortcomings. The countless mistakes, the wasted wood, the failures in design and construction. But that little shop and its well-worn tools had given me more in return than anything I had ever owned. Every day in my profession I had listened to the complaints, troubles and problems of humans. But, when time permitted, I could escape into the shelter of my shop where my tools and wood never asked for perfection, never questioned my decisions and never expected a miracle. Here one could beat on the bench in frustration and discard an error. Here one could listen to the sounds of creativity, here one could fashion something that could bring joy to others, and here one could harbor the secret hope that in a century hence someone would find a carefully hidden name and date and think that whoever made this thing did it well. But I was determined I certainly deserved and could afford better tools, so I wrote out the order blank -- one complete set, from 1/8-in. to 1-1/2-in., of Marples chisels, the best, the ones with the boxwood handles! W.W. Sauer, Paxton, Ill.




