New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Does an Old-Woman's Tooth go obsolete?

Posts

Does an Old-Woman's Tooth go obsolete?

#1

Does an Old-Woman's Tooth go obsolete?

Bruce McCrory

Today I bucked up courage to use my tailed router. Used to be all the time, but ...

An old--30-years--Sears model. With black base plate. I am free-handing hinge mortises, and couldn't see my marks on the hinge jamb. Solution: get a clear plate. Easy.

Wrong. Don't waste time looking at Super Box. "Buy-and-trash" is their motto. At Rockler, I was told "No plates for that Sears. Even universal. But, if you have Porter Cable, got it. P.C. is standardized, from Day One."

He gave me a discount on a sheet of clear plastic. After 2.5 hours and 35 miles on the road, looking, it took 20-minutes to make a new, clear plate.

Re: Does an Old-Woman's Tooth go obsolete?

#2

Re: Does an Old-Woman's Tooth go obsolete?

Bill Houghton, Sebastopol, CA

Given how many models of routah Sears has offered over the years, made by a number of different companies, it'd be wondrous and amazing if they were to offer aftermarket stuff like clear bases for all of them. Whittling your own is common.

What I've never figured out is why the black bases in the first place, unless it was just that clear plastics didn't come in suitable compounds - scratch-resistant, not brittle, etc. - for a long time. Why wouldn't you want to see where you were working?

Re: Does an Old-Woman's Tooth go obsolete?

#3

Re: Does an Old-Woman's Tooth go obsolete?

Bruce McCrory

The clear plate was incredibly easy to make. Forstner the center, tap 3 screw holes and follow up with a countersink. The big Forstner was a bit dicey--got hot--and I square cut the plate from the sheet. Finished with eased edges.

Of course, none of this fabrication was using manual hand tools. But my kick back is: "when's the last time someone made door frames from a pile of wood." Well, doors were manufactured, and hinges and locksets off-shelf items. I don't own a forge.

And next time, I will seriously look at pre-hung junk, after I finish puking. My list is too long to be building everything from the raw.

I am not ready to hand four doors over to Granny. Not yet.

That's my story... Phew!

Re: Does an Old-Woman's Tooth go obsolete?

#4

Re: Does an Old-Woman's Tooth go obsolete?

Steve Mackay

I feel the same way about ANY tool with batteries. Never, never, NEVER again. No matter how wonderfull, high-speed, long lasting, durable, "green" or "powerfull", the one you bought THIS year will be obsolete NEXT year.

Re: Does an Old-Woman's Tooth go obsolete?

#5

Re: Does an Old-Woman's Tooth go obsolete?

William Duffield

Well, there is also the debate over closed mouth vs. open mouth routers, which also has a lot to do with visibility, and also with working on the edge of narrow stock.

I think I prefer the ones that can reverse the cutter and mount it out front when necessary. That way, you can work up against a wall, which is not possible with a forked-tailed routah.

For increased visibility, you can find routahs with LED illumination. Of course, you could attach a compact flashlight to your router or old woman's tooth. You could even attach a candle, if you eschew batteries. Just melt a little wax and stick it down. :)

Re: Does an Old-Woman's Tooth go obsolete?

#6

Re: Tailed maybe, but no anchors

Bruce McCrory

I like your thinking. I do have a tallow fixation, right now; but it means cutting up more wood so I can stir the pot for 24-hours. No, the clear plastic worked.

My drywall finisher had a really nice, light, and very powerful battery-type screw gun. It went through two anchors pretty quickly, however; and he was back to a tail.

I can see where day-in, day-out use may justify batteries for the pro. I do think the casual homeowner/tool user get the wrong image, including accepting flaws and faults due to ignorance, thus ruining the commitment to quality and durability by the manufacturer. The pro will find the better tool in much shorter time.

Re: Does an Old-Woman's Tooth go obsolete?

#7

Re: Does an Old-Woman's Tooth go obsolete? *LINK*

Jerry Nicholson

Several years ago I bought some transparent router plates from someone for my DW621 and I think it was Pat Warner. There were of excellent quality but I don't know if he sells plates for old Craftsman routers or not. If it's the same guy, he has expanded his offerings greatly over the years.

Jerry


Pat Warner

Re: Does an Old-Woman's Tooth go obsolete?

#8

Re: Does an Old-Woman's Tooth go obsolete?

Bruce McCrory

I never worry about the context of "obsolete" that really means "out of favor". It's the "half-life" of a tool that worries me.

I succumbed to the checkout teasers at Harbor Freight, and grabbed a box of 8, or so, screw bits. The first one I used sheared in half on the first screw, midway into a prebored hole. I guess it had a half-life of 2 rotations.

Batteries crap out in two years. Lucky you, if there are replacements in that time frame.

Re: Does an Old-Woman's Tooth go obsolete?

#9

Re: Still black

Bruce McCrory

Check the new ones. They are still Bakelite(?) Maybe, if you can't see to begin with, you can't sue and win easily, vs. clear rubbing away (scratching) to non-visible.