Stanley 42 saw set question
Dave (Arlington, VA)
Hi All -
It has been a while since my last foray, but I am diving once again in the waters of saw sharpening. I just finished a George Bishop 5 1/2 PPI rip saw and I am very pleased with the outcome. All my previous efforts were with much smaller PPI saws and while the sharpening did improve the saw's performance, I was not totally thrilled with the outcome.
But now I am taking another step. I am taking a no-name 8 PPI saw that was filed rip and repointing it as cross cut. I am using a standard peg tooth configuration simply because none of my other saws have that configuration and its is really easy to keep the top of the file flat (or perpendicular) relative to the blade.
But I digress....my question is: I have a Stanley 42 sawset and I am trying to figure out how to use it. I have a couple of other saws (a Stanley handyman sawset, and a couple of Morrill style sawsets). All of my other sawsets have the number of PPI stamped into the sawset so you know how much to set it. But I can't find any such numbers on my Stanley 42. I do see four groves (?) in the side of the anvil, and clearly one adjusts the depth of the set by moving the anvil up and down. But how do you know when you have it in the right place for a 8 PPI saw such as the saw on which I am working right now?
I used the Stanley handyman on the rip saw, but wanted to use the 42 on this saw because the handle is so much easier to clamp shut and make the set...and my hand was getting tired after using the handiman (and the Morrill styles seem so much less comfortable to use).
I'm not complaining because I am blessed to have sawsets, but any help or advice would be much appreciated. Thank you.
Dave









