New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

gloss black finish

Posts

gloss black finish

#1

Jack Guzman from Maine

gloss black finish

Jack Guzman from Maine

I just replaced a broken piece on an Ethan Allen Boston Rocker.The new piece needs to be painted to match the rest of the chair. The chair is painted gloss black.The finish is high gloss that I don't think I can get straight out of a can of black latex enamel from the local hardware store.The finish on the arms looks alot like a piano finish.

Anyone have any idea what they used on this chair for a finish?Any ideas on how to get that look?

I emailed ethan allen but they said they would try to find an answer for me but I haven't heard backfrom them yet.---Jack

Re: gloss black finish

#2

Re: gloss black finish

Mark Hennebury

Hi Jack,

I did a gloss black dining room refinish about 30 years ago; it was my worst nightmare. The table was 12' long and you can see an out of place atom in flat gloss black surface. I recall that i dyed the wood black before applying the black sanding sealer and, put on multiple coats of sealer and multiple top coats, and i think it was finished with a clear gloss top coat. Lots of block sanding, to maintain flat. And lots of careful polishing.

Not much help, but that's all i have on gloss black.

Re: gloss black finish

#3

Re: gloss black finish

Bill Tindall, E.TN.

black enamel oil based paint. Then overcoat clear, or not. I do picture frames with this procedure. Kilz, sand glass smooth then black gloss paint. If you don't have a spray gun use aerosol cans. You may not be able to brush it as smooth as required.

Re: gloss black finish

#4

Re: gloss black finish

Ron in Sterling, CT

Jack,

You can also get a gloss black finish with black "rattle can" lacquer. I learned the hard/easy way by buying a can of black lacquer by mistake. Instead of throwing it away, I have used it on a couple of applications where I wanted a gloss black finish, and a lacquer finish was okay. Just my 2 cents.

Ron

Re: gloss black finish

#5

Jack Guzman from Maine

black laquer

Jack Guzman from Maine

I wonder would they have used black laquer in a chair factory ? I'm pretty sure that's where this chair came from.I think I'm going to have to do some experimenting.---Jack

Re: gloss black finish

#6

Re: gloss black finish

Bruce, a MN Galoot

A few years ago my daughter insisted on having black end tables and a matching coffee table of a design that I absolutely detested. But daughters can be insistent critters - my son takes whatever I give him and likes it that way. Anyway, I made the whole shebang out of baltic birch ply and sanded the daylights out of it. Then it got covered with three layers of rattle can lacquer. I sanded off the nibs between coats and buffed out the final layer. They actually turned out pretty well, and the finish was very glossy to boot, which was what she wanted.

Re: gloss black finish

#7

Re: gloss black finish

Patrick Gibbons

Look at the middle of the page for black shellac. I bought some out of curiosity. It was very dirty, it had quite a bit that needed to be filtered out. It does have a distinct purple tone. I show it more as a curiosity. Yesterday I was at Sherwin Williams and bought their high gloss enamel for outdoor floors and furniture. Haven't used it yet but looks like it might give you the effect you want and comes in black.

Re: gloss black finish

#8

Forgot the link  *LINK*


http://www.shellac.net/ShellacPricing.html

Re: gloss black finish

#9

Jack Guzman from Maine

Re: gloss black finish

Jack Guzman from Maine

I decided to go with spray can enamel.I think the trick to the shine is gonna be getting the surface smooth so prime/sand/spray is what I'm going with.Black shellac is an interesting product. I might find a use for that somewhere.---Jack