New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Saw Till

Posts

Saw Till

#1

Saw Till

Don Slaughter

As my passion grows....so does my need for a better method of storing my tools. I'm hoping someone can point me toward a good plan or idea for a saw till that will accommodate 6 (at least) handsaws. I have a functional method of storing my back saws but my full size handsaws need a safe harbor.

Thanks,

Don

Re: Saw Till

#2

Re: Saw Till *LINK*

Bob Entwisle in NJ

Hi Don,

I googled 'saw till plan' and there's plenty to look at and think about.

hope this helps a little.

Bob in NJ


http://tinyurl.com/c77wddb

Re: Saw Till

#3

Re: Saw Till

Don Slaughter

Makes me feel like an idiot......who'da thunk it....google.

Thanks, my friend

Re: Saw Till

#4

Re: Saw Till

Patrick Gibbons

I'm sorry about the poor quality of this picture. This is my saw storage. I put it together fast many years ago. Not the prettiest but it works. I need to build another till for the numerous other saws I've accumulated. My backsaws are on a lazy Susan. That's a feature that's appreciated every time I use it.


img

Re: Saw Till

#5

Re: Saw Till

John Pappas

Don, I didn't have wall space, so I came up with this.


Re: Saw Till

#6

Re: Saw Till

Derek Cohen (in Perth, Australia)

Don, just a basic box. It does accommodate saws of different sizes. There are rip and panel saws hanging on pegs alongside (as the backsaws have multiplied).


It rarely is this tidy. Cleaned it up just for you ... :)


Regards from Perth

Derek

Re: Saw Till

#7

Re: Saw Till *LINK*

Lars Parrington

I've got a saw till which is really a very clever design. I enjoy using it, and it is fun on shop tours. It is 14" wide and holds 11 saws. Inside, there are rubber rollers and ramps. I got the idea from the link below, click there to see how it works. I'd be happy to provide more info on mine if anyone is interested.





http://www.timberframe-tools.com/tools/saw-till-with-balls/

Re: Saw Till

#8

A square or rectangular dovetailed carcass...

david weaver

.. at least 4 or 5 inches longer than your longest saw with one board running along the bottom with notches for the saws, and one board notched into the whole thing about half way up to cut saw kerfs into.

Insert dowels on the ends with slight up attitude to hang joinery saws, and if you have japanese saws, finish nails around the bottom to hang the japanese saws. It can be made taller if you want to have a shelf at the top to throw things like saw sets and files/handles, etc.

Re: Saw Till

#9

Two tills

Ron Harper

The link

http://i1146.photobucket.com/albums/o528/RoninKokomo/f105d88d769cd85e0cb12e50a407e026_zps9f50496e.jpg

Takes you to a PIC with two tills. If I had it to do over I would probably expand the one on the floor. YMMV

Re: Saw Till

#10

Easier route to Pic 


img

Re: Saw Till

#11

Re: The wall till..

david weaver

Is very similar to mine. I'm not sorry that I didn't make it more complicated, either.

Re: Saw Till

#12

Re: Saw Till

Don Slaughter

Thanks Folks! That is exactly what I was hoping for ..... you always inspire me. I'll post pics when I finish my till

Re: Saw Till

#13

"Saw Till"

Bill Tindall, E.TN.


I was going to pass on this request till I noticed the word functional used to describe your back saw storage. While a container for saws is a worthy shop furniture project there is a simple functional way of storing them handily. This rack is located within reach behind the bench.

Note it is populated, for reasons of frugality, with Sandvik saws. They seem in my hands to be equivalent to Diston without the collectors premium.

Re: Saw Till

#14

Sandvik saws

Patrick Gibbons

Tom Law had high praise for Sandvik saws when I had him sharpen one for me years ago. eBay prices have increased on them but they are usually still a bargain. At one time, in the 70's, Sandvik owned Disston.