Re: design question
scott grandstaff
Thank you for the kind words Patrick.
The design is the hard part for me. Its the most fun part, but the hardest part of all.
I absolutely will not copy. I will steal little design elements from anybody. But never enough to get caught at it and certainly never a whole project.
I can't imagine how anyone could commit to a long project that was merely a mimic of design. It seem to me anyone could come up with their own given time.
And what else do you have to do in the bathtub? What about that boring TV show? What are you doing right now?
I am not very fast at it. I will fritter away lots of time over it. Sometimes it comes in the morning after a long sleep. Sometimes late at night when I can't sleep.
It sometimes takes me as long and sometimes longer to come up with the vision, than it does for construction.
I never could draw worth a crap! I can draft with instruments fine. I don't remember a time when I didn't have a T-square, protractor, a 45/90 and 30/60. I must have got them before I could talk.
But I can't bring any art to that. So I just take a pen and do the best I can. People often don't even know what the drawing was supposed to be. Sometimes not even animal mineral or vegetable. A 3rd grade kid would get a C- at best from any substitute teacher.
But its my roadmap.

After that its just a matter of staying as close to that vision as the practical world will allow. Once the vision is locked and you start, every detail between here and there becomes a compromise of some sort.
Fighting to hold and realize the vision is the struggle of it all.
Sometimes it takes years to complete the vision. Occasionally many years. Entirely new skills have to be learned. New dragons slain you didn't even know you would meet. Forinstance, you can't cast cement until you make an inside out mold...

It goes on and on........
Every detail of window trim

I got the poles from the Forest Service for under a dollar apiece. Tree thinning. Of course I had to log them myself 15 miles away, with my little tojo pickup.
I laid out the spirals with a long piece of ribbon. A chalkline was snapped. Increments were measured and marked and small brads driven in. Then the ribbon was wrapped and secured and a can of green spray paint make it permanent.
A saw cut to depth and then a broadaxe wasted the majority.



Through mortise and tenon, on a 10" pole, is work.




yours Scott