New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Unusual Disston D 95 and question

Posts

Unusual Disston D 95 and question

#1

Unusual Disston D 95 and question

Patrick Gibbons

I have two Disston D 95s with the brown/orange Disstonite handle. One is an 8 ppi crosscut that was made about 1953-1954. The other is unusual. It is a 5 1/2 ppi rip that was made after H. K. Porter bought Disston. According to the Disstonian Institute website, the D 95 was made with a walnut handle in 1955 before the H. K. Porter acquisition. Now I can't swear the rip is a D 95 because the etch is partially obscured by rust. But the handle and blade shape are identical to my crosscut D 95. I own another D 95 that was made after the Porter acquisition that has a beech handle.

My question involves the Disstonite handles. I want to rehab these two saws and wonder if there is something that I can do to clean and polish these handles without harming them. What would constitute over cleaning these handles?

Re: Unusual Disston D 95 and question

#2

Answer to my own question

Patrick Gibbons

A search on the Internet brought up more results than expected. Tenite was used for gunstocks and old telephones, among other things. It's amazing how many people collect old telephones and how much they know about their construction. Numerous sites suggested using Novus system plastic polish. I ordered some from Amazon and will show my results when I'm finished.

Re: Unusual Disston D 95 and question

#3

David Barnett

Good stuff, Novus

David Barnett

I've used and recommended Novus for refurbishing pipe stems and vintage fountain pens. Works very well on small buffs on a jeweler's polishing lathe, flex-shafts at low speed and variable speed drills with buffs.

Combined with Micro-Mesh and 3M Tri-M-Ite Imperial Polishing Paper, there's little you can't bring back to original luster. The lower-grit 3M papers are especially useful to get out deeper scratches, progressing from the papers to Micro-Mesh and finally to Novus. The Novus #1 is great for maintaining luster after restoration and really brings out color.

The soft 3M papers are, strong, long-lasting, resuseable and even washable. One thing, though, don't use any abrasive products on UV-coated acrylic optics

Re: Unusual Disston D 95 and question

#4

Update on tenite handle cleaning

Patrick Gibbons

I used the Novus products to clean up my Disstonite handle. The system consists of a plastic cleaner and shiner (#1), a fine scratch remover (#2) and a heavy scratch remover (#3). The picture shows the difference between the crosscut, which I cleaned up, and the rip, which has yet to be done. I did not attempt to remove the heavy scratches and dents and don't think they could be removed anyway without ruining the handle. Briefly I tried to use a buff wheel on the Dremel but this caused more damage than it cured. My results were obtained by hand while watching Perry Mason. Perhaps I should have polished more, but I tired of the activity and resolved to accept my present results as sufficient. I would guesstimate I spent about 3 hours in all on the handle.


img

Re: Unusual Disston D 95 and question

#5

Another picture

Patrick Gibbons

Here you can see the two before anything was done.


img

Re: Unusual Disston D 95 and question

#6

Jack Guzman from Maine

old Perry Mason or new?

Jack Guzman from Maine

I was introduced to Perry Mason when visiting my grandmother as a little boy in the 50s. She never missed an episode.The newer movies are good but you can't beat the old shows.

Good progress on the handles.---Jack

Re: Unusual Disston D 95 and question

#7

Old, of course, and thank you