New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Sometimes they have other uses

Posts

Sometimes they have other uses

#1

Sometimes they have other uses

Ron Harper

I bought this little fellow for a couple of bucks at a flea market. It is labeled "baby Terrier" and has a hardware store name above that. I understand it to be a box or crate opening hammer. I open almost no crates in my shop.. One day in the middle of a frustrating attempt to properly set a plane iron, I reached for this little guy and made a couple of taps to the high side of the iron. It is a wonderful tool for that function.


img

Re: Sometimes they have other uses

#2

Re: Sometimes they have other uses

TomD

Some tools just have the right weight, or sound. My favourite tool for planes, though I will use anything that is to hand, is a nylon hammer. It is easy on the wood, the metal, and it makes a very expressive "tock, tock" sound. Analysis of putters shows that the sound is what actually separates putters by "feel".

What makes matters worse is that this nylon hammer is at the extreme end of what could possibly look traditional: A chrome welded handle and head, and a black rubber grip...

Re: Sometimes they have other uses

#3

Re: Sometimes they have other uses

Ron Harper

I would not whack my wooden planes with this tool. My only nylon hammer head is too large for some of by blade adjusting tasks. I do use it on wooden wedges and the back of woodies to release the wedge or back the iron off lightly. I have a brass hammer gets some work in this area.

Re: Sometimes they have other uses

#4

Re: Sometimes they have other uses

William Duffield

I'm with you on this one, Ron. My plane hammer has a brass head for whacking the iron, and a lignum vitae head for whacking the beech parts.

Re: Sometimes they have other uses

#5

Re: Sometimes they have other uses

TomD

I have one of those brass heads that is brass on one end and maple on the other. Still not anywhere near as nice as the nylon one. It might be if it was nylon on the maple end, or delrin. Must try that some day.

Wood on wood is a loud sound, and brass is a cheap sort of sound. I'm more likely to pick up a urethane mallet if I really have to whack a wooden plane body, nice and quiet and it does not leave a mark. A million policemen can't all be wrong...