New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

is a Record 050C a useful tool

Posts

is a Record 050C a useful tool

#1

is a Record 050C a useful tool

Eric in Los Gatos

I just found a Record 050C combination plane for sale @ $75.00. Seems like a decent price for one that is in really nice (virtually) original shape and complete. I'm wondering if it's worth the money but even more is it worth owning as a user. I have a recently acquired Veritas rabbet plane and am considering their plow plane (or maybe a Record 043). Obviously the Record is a LOT less expensive but I don't want a tool I'll have to fight with. I'd rather step up to the Veritas plane and buy/make a beading tool.

So I'm wondering if any of you have any experience or recommendations.

Thanks,

Eric

P.S. Also posted on the main board by mistake. Please ignore.

Re: is a Record 050C a useful tool

#2

Please ignore above. Reposted on hand tool forum. 


Re: is a Record 050C a useful tool

#3

Re: is a Record 050C a useful tool *LINK*

Bill Houghton, Sebastopol, CA

I've always thought the shape of the handle was kind of odd. But it seems a serviceable enough tool, and, if it's not toward the end, when Record tools, like late Stanley tools, were pretty awful - well, it might be a worthwhile buy.

Some information at the link - scroll down. If you have time to e-mail Alf to ask her opinion, I'd recommend it. She's been helpful to me in the past.


http://www.cornishworkshop.co.uk/combinationplanes.html

Re: is a Record 050C a useful tool

#4

Re: is a Record 050C a useful tool *LINK*

Patrick Gibbons

Try Derek's review. I believe he does some comparisons that you'll find helpful.


http://www.inthewoodshop.com/ToolReviews/The%20Veritas%20Small%20Plow%20Plane.html

Re: is a Record 050C a useful tool

#5

Re: is a Record 050C a useful tool

CStanford

The 050C is a useful plane.

The plane used as a foil in Derek's infomercial for the Lee Valley plane is not the Record 050C you asked about. Wow, where does he get all this stuff?

The 050C has a nice little set of nickers (don't snicker) that are really little knives. These do a nice job scoring a line in front of the cutter for cross-grain work. On C-G work you can pull the plane backwards with the iron withdrawn to let the plane score a beginning set of lines, or use belt and suspenders and put in a set of lines with a marking knife and then use the knickers to score the lines. Don't use the knives when planing with the grain. It's not necessary.

Play around with the plane on some scrap. You'll discover strengths and weaknesses. It's what you have in your shop right now. Make it work for you. Hone the cutters well, and the knives.

Somebody posted a link to Alf's site. Download the manual, there, if you don't already have it.

Re: is a Record 050C a useful tool

#6

Re: is a Record 050C a useful tool

David Weaver

Yes, a fine plane to have and use.

The one you want to avoid is the stanley 50 that secures the irons by gripping their sides. You can use them, but the iron will gradually increase its depth of cut on you over and over.

The record is fine, though, and a good deal complete at $75.

Re: is a Record 050C a useful tool

#7

Re: is a Record 050C a useful tool

Eric in Los Gatos

Thanks for the input folks. I decided it was worth a look and then a buy. It's in virtually original condition and the box is even in pretty good shape. (Didn't come with the manual but I found it on Alf's site.) Most of the decal is there and only one of the irons has even been sharpened. It even came with a duplicate partial iron set (I think less the beading irons.) so if anyone out there is looking for them let me know. I tried it by planing a bead onto a rough piece of redwood. A relatively easy task easily accomplished. Now I just need some shop time to experiment. I figure if it doesn't work out a collector will be interest just based on condition.

Thanks again.

Eric

Re: is a Record 050C a useful tool

#8

Re: is a Record 050C a useful tool

David Weaver

It will be useful. If for nothing else, it'll be a great drawer groove plane, but you'll find other places to use it.

The post I made below "A pair of...", the rabbet at the top of those moulding planes on the grip was cut with the lee valley version of the small plow with successive cuts. There might be times like that where you need to be precise on something that's not very large, and you'll appreciate the ability to take small bites.