New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Mystery of ron's mortiser solution

Posts

Mystery of ron's mortiser solution

#1

Mystery of ron's mortiser solution

Ron Harper

Robin suggested that my chisel must be bent. I was in a hurry and made a very superficial look and said he was mistaken. I was away on business for a few days, and had a lot of time to brood about it. I got back to the shop this morning, tool the chisel out and under careful scrutiny....... It is bent. Not much. But enough to be partially responsible for my difficulty. The astounding thing about this was that in the envelope that I got with the machine was another quarter inch chisel. Seriously. I put it in the machine and got somewhat better results. Not good enough. Darrell Larue suggested shimming. Bingo, one piece of duct tape applied to the fence and all is square and plumb. A huge Thank you to all for your input. Stop by and watch this thing work. The coffee pot is always on.

Ron... Goin back down to the shop