New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Slightly OT request for honing help

Posts

Slightly OT request for honing help

#1

Slightly OT request for honing help

Ron Harper

A friend of mine who has a benchtop mortiser asked me if i knew where to find the small shaped stones that would hone the inside bevels on the hollow chisels. I told him I would try to find out.

Thanks for any help

Ron

Re: Slightly OT request for honing help

#2

Jack Guzman from Maine

Rockler 


Re: Slightly OT request for honing help

#3

Nothing close in on line catalog


Re: Slightly OT request for honing help

#4

Ooops did find it Thanks Jack


Re: Slightly OT request for honing help

#5

Re: Slightly OT request for honing help *LINK*

William Duffield

Lee Valley. Last item, # 77J81.20 on this page:


Diamond Hones, pair

Re: Slightly OT request for honing help

#6

Re: Not really OT *LINK*

William Duffield

…Since they also work on these manual square hole punches, designed by Darrell Peart, used for installing ebony pegs in Greene & Greene furniture.


Square Hole Punches

Re: Slightly OT request for honing help

#7

Re: Slightly OT request for honing help

Gary Hodgin

Never tried to hone a mortise chisel, but I found this popular woodworking article about it. Looks like it uses the Lee Valley stuff linked in above post.

http://www.popularwoodworking.com/tools/hollow-mortise-chisel-tune-up

Re: Slightly OT request for honing help

#9

Thank you Gents