New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Small gloat and help needed

Posts

Small gloat and help needed

#1

Small gloat and help needed

Ron Harper

Just found a Barnes Foot Powered Mortiser at a price I deem reasonable as it appears to be in good working order and came with several chisels.

Anybody know how to change the chisel? It is not obvious to me.

Thanks for any help

Ron

Re: Small gloat and help needed

#2

Re: Small gloat and help needed *LINK*

Larry Barrett

Congratulations! Can't answer your question directly, but watch the first episode (3201) of the Current Season of the Woodwright's Shop - Rise of the Machines. Roy demos several Barnes foot powered machines, including the mortiser. I think he says it is his favorite machine. If the show does not give you a hint, you could probably contact Roy at his school.


http://www.pbs.org/woodwrightsshop/video/3200/index.html

Re: Small gloat and help needed

#3

Re: Small gloat and help needed

JiminVA

I have a Barnes foot mortiser and it's great. You're lucky to have the chisels as they are hard to find. The chisels are just held in by a Morse taper. (Like the chuck in a drill press.) Put an adjustable wrench around the chisel and twist slightly. That should break the "lock" and the chisel will slide out. You can also help it by gently tapping on the shoulder of the chisel.

Re: Small gloat and help needed

#4

Thank you very much


Re: Small gloat and help needed

#5

Question

Patrick Gibbons

Often times electric powered tools don't have the torque necessary to get the job done. This has improved greatly in the last twenty or so years but mortisers were one of those underpowered tools one could run into. I'm curious if your new-found beauty powers through or muddles on. Please give us a report with pictures when you can get a round tuit. Also let me know if you find a good source for tuits.