New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

repairing a crackI friend

Posts

repairing a crackI friend

#1

repairing a crackI friend

eliot d

A friend had a fine dark wood sculpture shipped from Africa to Maryland, but it arrived broken. I glued it back together for him, but the seams still show. I'd say there are some crack-like lines about a millimeter thick and an inch or so long. I plan to make up some wood filler from dark particles of wood and liquid hide glue and maybe mix in some carefully-blended acrylic colors to fill in these cracks. Is this a good plan, or should I spring for some sort of professional wood-filler wax -- or whatever it is -- to do the job?

Re: repairing a crackI friend

#2

David Barnett

(Message Deleted by Poster)


Re: repairing a crackI friend

#3

Re: Before proceeding

eliot d

The owner is happy to have me do it; he likes the sculpture but it's not a Rodin or something. Right now, it looks pretty good. But I wanted to go a step further to make the small crack-like lines disappear. I'm fairly confident that I can do a good job, but I thought I'd ask here just to see if my plan is a good one. The last time (many years ago) I watched a pro get rid of some deep scratches on my piano, he used a little kit of various colored wax like stuff to fill the scratches in. I'm not getting many responses, so I guess this may be a bit off topic here.

Re: repairing a crackI friend

#4

Re: Before proceeding

William Duffield

The wax sticks, and for a much more durable repair, shellac sticks, are made by Liberon, and can be purchased from Joel at Tools for Working Wood.

http://www.toolsforworkingwood.com/

Enter the following item codes into their search engine:

LB-0250.SS for wax sticks

LB-0260.SF for shellac sticks

Re: repairing a crackI friend

#5

Re: repairing a crackI friend

eliot d

I finally decided to try a Varathane wood stick thingy I found at the local hardware store. The no 10 color was called Dark Walnut, which most closely matched the color of this sculpture. It turned out to be a perfect match. The real problem was getting the stuff into the cracks and crevices. I looked up on their data sheet and saw the the primary ingredient is wax, so I simply melted the stuff into the cracks. You can't tell that it was ever broken.