New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Drawer interiors

Posts

Drawer interiors

#1

Drawer interiors

Wiley Horne--So. Calif.

Hi All,

For a writing desk, how can the drawer interiors be compartmented or arranged for ease of storing and retrieving the usual stuff--paper, cards, pens, pencils, stamps, paperclips, and so on?

I have in mind two drawers, side by side with divider between, each drawer approx. 16" wide (15-1/4 usable), 3" usable interior height, 15-1/2" usable depth.

The default option is to leave them open, which enables the most stuff to be inside, and just put up with the usual jumble. On the other hand, compartmentation has its pluses and minuses too--maybe just a small compartment up front to hold the most grabbed-for things. I have also thought of making a matching multi-drawer box to sit on top of the desk, to hold odds and ends.

What have you done, or seen done? Or imagined? All thoughts appreciated!

Wiley...moving at glacial speed

Re: Drawer interiors

#2

Ellis Walentine

Writing desk drawers

Ellis Walentine

Hi Wiley,

Here are a couple thoughts for you. First, 3" is pretty deep for pencil drawers. You could get by with half that, or less. When I was a product manager in the contract furniture business, I got to design production stuff like pencil drawers, file drawers, box drawers, pedestals, etc., and after I left that position, I became an outside contractor for my old company, making pencil drawers in my shop 5,000 at a time.

Our drawer layout was all done in white oak, and all joints were blind sliding dovetails. Now, this being the hand tools board, our production techniques were pretty thoroughly automated, using routers and relatively simple jigs to make the slots and the tails.

Here's the gist of the design. It's pretty generic. You might want to modify the layout to suit more specific space requirements.

Ellis


Re: Drawer interiors

#3

Re: Drawer interiors

Derek Cohen (in Perth, Australia)

Hi Wiley

I will be startin on a desk soon, and the same question occurred to me. My thoughts at present run to building loose dividers that fit into he drawer, something along the lines of a shoji frame. This way the dividers can be removed if there is a change of mind.

Regards from Perth

Derek

Re: Drawer interiors

#4

insert

Bill Tindall, E.Tn.

I bought a high end walnut desk at auction and it had an insert that looks like what Ellis drew. (warning-drive by, the desk had a small upper right drawer missing and I snagged it for $125 while the others with all their drawers went for 500-550. It was no problem making a matching drawer.)

Re: Drawer interiors

#5

Re: insert

Patrick Gibbons

I have also seen drawers with dados at regular intervals so that dividers can be placed where needed. My choice would be to divide out only what is necessary and leave the majority of the drawer open. Perhaps a section for pencils with the rest of the drawer divided in two. One could use divider inserts similar to that used with silverware drawers.

Re: Drawer interiors

#6

Interesting proposal this morning

Wiley Horne--So. Calif.

Hi All,

Longtime friend Konrad Sauer wrote this morning to show photos of a cutlery drawer he made for his newly redone kitchen.

He had an ingenious solution on how to make a deeper drawer work. The solution was to have a sliding tray as the upper level, moving from side to side (on ledges) above the lower level. For his cutlery drawer, he had both the lower level and the sliding tray above compartmented, using dovetailed dividers. You can get at everything in the lower level, because the upper level tray slides out of the way.

I plan to use his solution on at least one of my two drawers. I will leave the bottom of the drawer uncompartmented for stationery, cards, envelopes, and partition the sliding tray for pens, pencils, and small items that tend to get lost.

Big thanks to Ellis, Bill, Derek, and Patrick for their suggestions!

Wiley

Re: Drawer interiors

#7

You beat me to the slider

Bruce McCrory

I was going to mention the sliding tray scheme.

I have an old (wood) drafting table. The small side drawer for templates, erasers, dividers, junk, has a light, plastic tray about 1" deep that floats over the rest. The rails for the tray are high, without intruding into the main belly of the drawer. The rails also define the limits of clutter on the bottom. The tray easily--and lightly--bumps over obstructions from below. [I am a practical designer.]

Also, tiny pigeon hole dividers tend to be a nuisance, blocking space, catching pins, clips, dust; and taunt your bulky fingers. (You could grow finger talons.)

Re: Drawer interiors

#8

And, Don't forget drawer glides ...

Bruce McCrory

... nice smooth gliding drawers that don't bind, kink, clank on metal, or grind. More than stupid dovetails, the best drawers . . . . glide....

So sweet..