Re: sadly
TomD
Unfortunately some guys ganged up on him and made YT take the video down because it was unsafe. Probably most things in a KMs shop are unsafe, but I think his stuff was no worse than most.
His jig was that he had a wheel, and a flat rest in front of it. He had two pieces of plate welded to an angle so that when the blade was clamped to the plate with a vice grip style welding clamp it was presented at the correct angle to the stone. He did not say, but I would get that angle by measuring my knife thickness and height and overlapping the radius of my wheel to provide a proper hollow ground (could also be flat). I would model that in a little piece of wood. hold it against the wheel, at the expected height, and I would then use a bevel gage to get that angle and from that I would set the angle of my jig. I guess on could make it adjustable. One could also make it out of wool and maybe screw the blade to it.
Each knife has a perfect jig for wheel, jig, blade, and rest. The jig moves freely on the rest.
The straight part of the blade from grip to bend can be ground from the jig, however, when you get it to the end, on most knives the curve will require you to use some english.