New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Finish question: Bleaching QS sycamore?

Posts

Finish question: Bleaching QS sycamore?

#1

Finish question: Bleaching QS sycamore?

Scott in Douglassville

Hi, all -

I have a project in mind and want to use some QS sycamore scraps. Ideally, I'd like the wood to be very light, almost white, but I'm wondering what the effects of bleaching QS sycamore are on the ray patterns. Do they lighten, or go away completely? Anyone ever done this?

Thanks!

Scott

Re: Finish question: Bleaching QS sycamore?

#2

Strangely enough, I have...

John in NM

Though it was in 1997 or so, memory is kinda fuzzy. Don't remember the bleach product well, just that it was two parts and came in a black and yellow box. Don't remember if they were liquid or dry+water, I think you applied one, waited a while then applied the other.

The wood got very light in color, almost like holly with a little more yellow to it. Ray flecks lightened too, but didn't disappear. I recall they were not as obvious as pre-bleach, but I may be imagining that. Wood did seem to get more porous, or at least maybe a little punky. Much of that goes away after sanding or scraping, so don't bother going much past 80 grit before you bleach.