How I built my house for nothing
Jack Guzman from Maine
Well,I did have to buy a few things. Nails for one, but here's the story: I had a two acre lot,already cleared ,with a driveway, by loggers. It had at one time been a landing. Ruts from the skidder all around the lot. I built on a high spot at the end of the driveway.
I picked up a pile of broken cinder blocks and scrap metal from the local landfill.I dug four foot holes and stacked half blocks so there was a hole in the center all the way through.Put bed rails,pipe or whatever scrap metal worked in the center as reinforcement and filled with concrete. Here's where I spent some money. I had to buy bags of portland cement. I got the aggregate from the local gravel pit.Now I had a foundation of sorts.
I was working on a framing crew as one of three laborers for an independent contractor. He had bought a truckload of pressure treated culls from the lumberyard and let me pick through it for materials. I got 4x6s that I used as a sill from this pile.Laid on edge with my columns four feet apart I had a decent foundation.
This contractor was working with a mason and a financier and these guys were buying homes in a run down section of a local city from the poor people living in them and clearing the lots. Then we framed up one family houses,threw on vinyl siding,put in a lawn and they were selling like crazy. This was a boom time in the 80s.They actually rebuilt the whole neighborhood. They even put in street drainage and paved the road.
This situation was perfect for me.As we tore down these houses I got to keep all the materials I could salvage. From one property,with help from my fellow laborers we carefully took down a 40 by 40 garage( off the clock). I got all the plywood sheathing and 2x4s for my ground floor out of that garage.
One other job we took on was to remove a shed style roof from a house and frame up a second floor addition. I got all the rafters. They were 2x10 X16.Actually 1 3/4 by 9 3/4.
My wife and I pulled many rusty nails. Alot we straightened and reused. I now had my floors framed up but I needed floor boards. A neighbor of mine had a chevy c60. It was a dump truck with a five speed transmission. He used the truck for hauling firewood. His transmission broke. He had a big pile of pine boards that he had milled off his property and offered some as trade for labor if I'd put a new transmission in for him. So,for about 2000 board feet of 1"pine in odd widths, I switched transmissions for him right in his dirt driveway. That thing was heavy. Getting it up in place from underneath was an engineering feat. I had my floors.
I framed up the walls with help from my wife(she pounded most of the sheathing and flooring nails),sheathed them with scrap plywood.All this framing I was just learning on the job. I had been a mechanic . So I learned as I built.
One house we tore down wasn't a shack. It was a cute old place but empty of people and it came down for progress. I got all my windows and doors out of that house after work.
One other purchase I had to make was ceiling/upper floor joists. The local sawmill had hemlock 2x8x12s for about $3 each.So I got what I needed and nailed them in place.Once the pine boards were down on this floor we put a pool cover over the top that a friend gave us when she replaced it with a new one .
I built an outhouse in the back yard. We put a small apartment size gas stove in it, a small pot belly stove for heat and some basic furniture.
We spent a winter in that house,used a generator for electricity. In the spring I started on the second floor and by fall had to actually buy some materials so we could get a roof on it before snow.In all, the second floor cost $2500. That includes materials for two pans of my wife's lasagna and a keg of beer for the crew of local carpenters that helped us throw it up in one day. I've been redoing some mistakes and finishing it ever since. And we do have electricity and running water. The outhouse is gone.---Jack




