New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

New Christmas Gift

Posts

New Christmas Gift

#1

New Christmas Gift

Patrick Gibbons

I just finished this box out of cherry with the hasp and hinges made of white oak. I fumed this and both woods darkened considerably. They looked dull and gray out of the chamber but toned up nicely with the first coat of tung oil. I'm not an experienced carver and the shell is my second attempt. It is a simple motif but the first try was just ugly. I think this one turned out well. I used a nail for the hasp to turn on and put a 1/4-20 stove bolt through the box and tapped the button so it could be turned open and closed. The hinges are tapped and secured to the box with 1/4-20 bolts and rotate on maple dowels. The design was made on the fly and resulted in some mistakes. The main one was beveling the molding on the top which turned out to be unnecessary. The stove bolts were NOS, American-made, unfinished. They fit perfectly with the look of the box. The hasp is just glued on and I worry that it needs some other mechanical attachment such as nails. I didn't want to detract from its looks.


img

Re: New Christmas Gift

#2

Close up of hinges and hasp 


img

Re: New Christmas Gift

#3

Re: New Christmas Gift

archie

Very nice!!!

Re: New Christmas Gift

#4

Re: Close up of hinges and hasp

TomD

That box is still a lot nicer than the hardware. Congrats on that. There is a glue at marine hardwares called 3M 5200, that will tenaciously bond metal to stuff in ways one could not imagine would be successful. My pal has bonded a strip of stainless to the keel of his 46 foot catamaran, and he expects it to hold up just fine, I don't. The only thing is I don't know how it would work in your particular situation, whether you could hide it from view, or if it has an odour (don't think so). But it is a caulking type consistency.

Re: New Christmas Gift

#5

+1 to Very Nice


Re: New Christmas Gift

#6

Nicely done


Re: New Christmas Gift

#7

An interesting side note

Patrick Gibbons

I turned an item for my son out of white oak. For fun I placed it inside the box since the box is degassing and still has a strong ammonia smell. Sure enough, the small item is getting darker just from being closed up inside the box.

Re: New Christmas Gift

#8

Re: New Christmas Gift

Wiley Horne--So. Calif.

All the thought and unique personal touches will make this a gift to be remembered for many Christmases to come. Well done!

Wiley

Re: New Christmas Gift

#9

Ellis Walentine

Wonderful!


Re: New Christmas Gift

#10

Re: New Christmas Gift

Bill Tindall, E.Tn.

The box with its hinges is just awesome but to be honest the bolts need to go. See if you can find some iron square headed bolts or what I will call a "cotter pin" like what is used to attach iron hardware circa 1700. Try Whitechapel to see if they have something that looks more in keeping with the rest of this magnificent box.

Re: New Christmas Gift

#11

Robert Tutsky

Unique design... I like it.


Re: New Christmas Gift

#12

The hardware

Bob Hackett

A little time with a simple torch, a hammer and punch can make your hardware can as outstanding as the box itself. If you need some ideas for personalizing hardware we have a contingency of part time metal workers lurking here that you can ask for help. Just prepare to be nearly overwhelmed with both ideas and pics. :D

I agree with Bill when he suggested that such an outstanding project deserves less mundane hardware.