Speaking of screws
Ron Harper
What kind do you use in your woodworking? For visible screws (hinges, etc.), I prefer to clock traditional screws. For all other stuff that you don't see, I use square drive.
Ron
Knowledge You Can Build On — Est. 1998
Speaking of screws
Ron Harper
What kind do you use in your woodworking? For visible screws (hinges, etc.), I prefer to clock traditional screws. For all other stuff that you don't see, I use square drive.
Ron
Re: Speaking of screws
ron bontz
Traditional slotted or oval phillips brass for nice stuff. Steel for hidden or plugged. 
Re: Speaking of screws
Jack Guzman from Maine
I collect screws. I repair furniture so matching screws is important. When just looking for something to hold good without being seen, drywall screws are real handy. However different screws are needed for different situations.I go to my used screw jar quite often.I tried buying various sizes and keeping a stock of new screws but I never seem to have the size I need so I stopped that. Whenever I see a screw it goes in the jar(I have a few jars).---Jack
Re: Speaking of screws
Patrick Gibbons
Screws are one clue used on dating a piece of furniture. More and more I use square drive screws in visible locations where I used to not. I prefer these to other types and I find myself being less convinced that they shouldn't be seen in finer furniture. They date my furniture. I also trust them more (I use McFeely's screws) to not break on me and ruin a project or cause problems. If I think that the look of a square drive will greatly take away from my project's appearance I won't use it. But I've grown to really hate slotted screws because of their fragility. It's just so easy to distort their metal slots.
Re: Speaking of screws
Bill Houghton, Sebastopol, CA
I prefer slotted screws in hinges, too - but they're harder and harder to find.
For screws in utility locations, I've come to prefer Torx drive where I can get it, except for trim head screws - the trim head screws I can get locally are square drive.
drywall screws are brittle
Chris Friesen
Don't use drywall screws for anything important...they're skinny and brittle.
A similar-sized lo-root screw will be much stronger due to better heat treating but hold just as well.