New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

marking out dovetails

Posts

marking out dovetails

#1

marking out dovetails

eliot d

I've hardly ever done it, so my question is pretty basic: if I choose to mark out the tails symmetrically about a center line, is there any particular reason to put half tails at the two edges?

Re: marking out dovetails

#2

I have half pins there


Re: marking out dovetails

#3

Re: I have half pins there, +1


Re: marking out dovetails

#4

pins on the end, too, but

Bruce, a MN Galoot

depending on how thick they are, mine usually end up being a bit more than a half pin, otherwise they can be a bit too frail.

Re: marking out dovetails

#5

Re: pins on the end, too, but

John Pappas

My understanding has been that 'half pin' doesn't mean literally a half pin, but rather that it is only angled on one side.

Re: marking out dovetails

#6

There has bee discussion

Bruce, a MN Galoot

indicating that some people take the "half" business literally.