We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
Needs a coat of wax. I realize that the carving is not appropriate for this genre. However, I wanted to do it, and the piece goes by my side of the bed to hold CPAP equipment. So, I went ahead with it. The particular piece of cherry that I picked for the carving was a little quarrelsome, but I learned a lot.
Second project after a ten year layoff. A couple of detectable goofs, but am making progress. It really is different working wood with almost all hand tools. This project did utilize electrons to thickness stock.
This is the table top that prompted the large joint failure/ hide glue thread a couple of weeks ago.
Starting a small Christmas present project tomorrow. The picture frame by Becksvoort in last issue of FWW. Gotta figure out how to do it witk hand tools.
I took a chip-carving class because I only needed two tools; and spending more than $70 for them was going to be a sucker's experience. During the class I found out that wood was severely limited. Now, I am debating expanding into chisels. Not so cheap anymore.
Those table corners have me nervous. But I suppose the soft spots--most injury prone, less eyeballs--are protected by a mask.
I see lots of book storage, note storage, flu and cold meds. storage. Yup, a nice piece of furniture.
Nice work, and you don't need to apologize for the carving. It is appropriate to the period, but more important, what you want to make trumps the rules.
This is taking the discussion far from just an appropriate compliment of the piece at hand.......
The large and "stuffy' furniture of the 18 century is drifting out of current fashion. Shops wedded to this style don't have the interest they once had. Yet many of the basic design elements of this furniture remain timeless. If the carvings, moldings, size and other "superficial" (not sure that is the best word to use) elements were modernized for today's fashion and living space this furniture would have wider appeal. To that end I think it is great that furniture builders are willing to add or subtract design elements from traditional styles. So long as the end result is pleasing there is no need to be constrained by a traditional style and its adornments.
As others have said if the carvings work for you that's all that matters. Glad that you worked with the quiet tools. For me, in the past almost every woodworking procedure was done with power tools. Now it's almost entirely hand tools and I find I am enjoying woodworking so much more. I believe you're feeling the same. Good luck with the picture frame project.