New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

New pretty old jointer

Posts

New pretty old jointer

#1

New pretty old jointer

Ron Harper

Went out on an online auction site and bought this in the hope that it would be easier for me to joint a square edge on a 4 ft board than it is with my 608c. I continue to bevel the edge toward me with the Bedrock.

When the plane arrived, I was pleased with the overall condition, and really pleased with the James Cam iron with three inches of usable steel left. It took me about 30 minutes to flatten the bottom two inches of the back of the iron. I then honed it. I will not start a storm by saying how. I am very pleased with this plane. The jury is still out on whether it will help me with my edge jointing issues. Will practice some and report back. The toe of the plane has been whopped several times and I could not decipher any identification on this plane

Ron


img

Re: New pretty old jointer

#2

Re: New pretty old jointer

Clementine

I may have the twin. Length 26." No brand name, but it has stamped on the end "W.M.C." Probably the previous owner's initials. The 2.25" wide blade is stamped "F.Stones 8." It's pretty heavy, but when I get it right it sure does a nice job.