New set of chisels
Robert Tutsky
I am starting this woodworking thing all over again after loosing just about everything I had previously. I am on a shoestring budget presently and that's okay, I have become more resourceful and enjoy that challenge in itself. At the height of it all in the past I owned a full set of two cherries and a smattering of 750s, Witherbys, a few chisels shop made that worked well and some oddball chisels I don't remember the names but favored most of them.
Because I need quite a variety of tools and supplies to get going I took a chance on a cheap set of chisels in hopes that they would have even a marginal performance to accomplish what a chisel needs to do. So after searching around I found the Neiko chisels. Hey, for $49 they were definetely within my budget. I would love a set of LN or LV chisels but I have the need of coin left in the till to even buy some wood to use a chisel on.

First of all this post is not a sales pitch, I have no affiliation to the product at all, just my experience with using them. Most folks here I suppose have chisels that would put these to shame.
I realize they don't compare to high end chisels but for me at this stage of the game they worked better than I thought they would. They came somewhat sharp and the backs were easily smoothed out flat. I spent about an hour and a half honing them all to bring them up to par. The first use was a 3" through
mortise in maple for a mallet head and it certainly was a workout considering I didn't have a drill press to bore some of the waste out before chiseling... I didn't trust my ability in accurately drilling by a hand drill.
After finishing the mortise, the 1/2" chisel seemed as sharp as when I started. At approximately $5 per chisel I was pleased with the purchase. The finished mallet:

Now it's on to adding more stuff as I go...



