New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Emmert vise question

Posts

Emmert vise question

#1

Emmert vise question

Gary Smyth

Duplicate from messageboards

I have had for a couple of years a Emmert patternmaker’s vise. I believe that it is a number 2, 14 inch. It was a very nice find, but it does not have the tilt under table bracket stand or the tilt bar. I believe the numbers are K-44 assembly including a K-44 bench bracket, cam locking lever (K-64), eye bolt (K-4), and lock nut (K-72). Yesterday I found a Emmert turtle vise with serious problems, but it has a tilt assembly without damage. Will the turtle tilt fit the No.2? Update—there is on ebay a tilt bracket and the description says that they will work but so far no response from the ebay seller and besides, I’m looking for a second confirmation. Can anyone directly help or send me to a source for the information?

Re: Emmert vise question

#2

Re: Emmert vise question

Jim Ritter

From the two vises I have, the turtle and the k models are different and are not interchangeable. I have the K-1 at 18" I believe. Both are parts vises but I sold the angle arm and stand awhile ago.

Re: Emmert vise question

#3

Can't help, but

Bill Houghton, Sebastopol, CA

Did you intend the photo in your post to be a driveby chisel gloat?

Re: Emmert vise question

#4

Photo corrected.  I have no idea

Gary Smyth

where that other (chisel) image came from - never seen it before. It's not in any of my files.

Re: Emmert vise question

#5

Re: Emmert vise question

Jim Ritter

The "iron hand " website might help you sort this out. When the weather breaks here on Long Island, NY,and I can get back to the shop(if it is still there) I can photograph things for you. Just let me know.

Re: Emmert vise question

#6

Jim, best wishes with the weather and

Gary Smyth

I emailed Iron Hand and sources listed in them. By the time Hurricane Sandy gets through I should have some answers returned. I'll keep your offer until then. Thanks.